Search results

Thanks Bob, TedG

Good morning all. I'm looking for information on Trautwein Products located at 992 Turnpike Rd., Cambridge, NY 12816. Can anyone living in or near Cambridge tell me if this Company is still in business and if so possibly help me get in touch with them? I am helping a friend restore a 1937 Ford...

Good morning all, I need the location of the tab that the top irons attach to on both the '28-'29 Roadster & Roadster Pickup. Anyone have this info or feel like taking the time to measure the distance from the back edge of the door to the center of the square hole? It would be most helpful...

I was talking with a fellow that owns a '32 Pickup, he claims you can tell a real '32 CCPU because they have the gas tank & cap under the seat yet I've seen pickups advertised as being 1932 with the filler out side the cab. I feel this may be something Ford changed mid-year like the '31 Model...

Does anyone know where I can get a set of chrome or stainless screws for '28-'29 Roadster windshield stanchions? Mac's catalog lists chrome but they sent me Cadmium plated and when I called to question why the were not chrome plated I was told the info in the catalog was a misprint. I also...

Good Morning All. I need some information on '28-'29 Roadster Windshields & Stanchions, had most of this info on another computer but lost it due to technical problems, tried doing a search but didn't have much luck. First off I need to know the distance between the stanchions at the cups...

I need to find the center to center measurement of the tailgate hinges on a 28/29 pickup. I tried the search function but no luck there. Any help would be greatly appreciated. Thanks, TedG

Like the title says, looking for a good 8BA block with main caps. I already have 2 cracked ones and a couple hundred bucks ******* in hot tank and magnafluxing charges so I really don't need another boat anchor. I'm located about 40 miles northeast of Philadelphia.

I'm looking for a dash reinforcement bar for a 28-29 open car. This is the piece that runs across the top of the gas tank between the windshield posts. PM or tedjg@localnet.com Thanks, Ted

First let me start by say thanks to all the Ford Barners that responded to my questions in the past, I don't think this project would have gotten this far this quickly without their help, the car was delivered to me as a rolling chassis and large pile of body parts in April of 2010. We...

A Sun Visor came with the '29 Sport Coupe I'm working on and the hardware kit I bought to install it came with 4 machine screws, 9 wood screws and 13 trim washers but the visor only has the 2 holes on each end where it attaches to the hinge posts with the machine screws. The metal cover for...

Still trying to sort out some details before starting the top install on a '29 Sport Coupe and after looking at a couple of cars yesterday I have a question on the welting below the rear window. should the welting stop on each side of the window openning like on this '28? Or continue...

The '29 Sport Coupe I'm working on came in pieces and without top parts, what type of Drip Rails or Rain Gutters were used on the Sport Coupes, does anyone have any clear close-up pictures and if I cannot find originals would any of the ones offered by the parts suppliers be close?

How does the Radiator Splash Shield get mounted on a '29 A? Do the tabs with the D-nuts go: 1. Between the Hood Shelf and Fender flange. 2. Between the Fender flange and the Frame Horn. 3. Inside the Frame Horn. Someone told me that they thought the tabs go inside the frame horns but he...

Working on a '29 A, the engine was supposedly rebuilt some time ago (don't know when) and then the car sat for a while (don't know how long). It did not have any oil in the pan so I added 5 qts. through the distributor hole. Tried to turn it over with the crank and it would not budge, put a...

Can anyone post a clear close-up picture of where the Belt Rail Molding terminates at the front, does it wrap into the door jam? I have the moulding for the one I'm working on and the thin piece at the front is folded over on one end and broken off the other and I can't seem to find a pic of...

Has anyone on here from PA applied for a Motor Vehicle Title after building a Model A from a collection of parts? I know about Broadway Title but I have much more time than money so if it's possible I don't mind doing the legwork. Any help with the actual procedure would be greatly appreciated.

I'm planning on painting a '29 Sport Coupe the Rose Beige and Seal Brown combination, the books I have say Rose Beige for the body color and Seal Brown on the moldings, window reveals and windshield frame along with an Orange stripe on the mouldings. My question is what color do I paint the...