Search results

  1. T

    Starter Whirl

    Thank ou solved problem with original switch from 28 special coupe I am restoring but the problem will re arise when its time to replace it in the coupe.
  2. T

    Starter Whirl

    Twice today on starting the starter engaged, engine did not catch but starter whirled until rapped with mallet? Cause? Thank you Tom
  3. T

    Wind Shield Wiper Problem

    Have a 29 Briggs that has been converted to 12 volt. The wind shield wiper is an original 6 volt. It works fine when connected to 6 volt battery. However when hooked to a voltage reducer it will not operate. Ground is good and lead from the voltage reducer is good. What am I missing? Thanks Tom
  4. T

    29 PU door alignment

    Hung the doors early this week. Driver door after a bit of adjustment closes/latches and opens nicely. The passenger door how ever is 1/2 inch low at the latch. My understanding is that to lift the door shim the back of the cowl. Question is how as the PU body block is long running under the...
  5. T

    29 PU Door Alignment

    Hung the doors this past week. Driver door aligned after a few latch adjustments and open/closes well. The passenger door is 1/2 inch low at the latch. My understanding is that the back of the cowl needs to be shimmed up. Problem is how. The body block is long running under the cowl and the door...
  6. T

    Several Model A's For Sale

    Hi tell me the dimensions. I might have some Tom 3226tb@gmail.com
  7. T

    For sale- 1929 4-door-steelback

    Hello I am looking for a stong touring A. What of the engine? Has it been rebuilt? If so how..that is babbit or inserts, balanced crank, high compression head, ported exhaust valves and such. If so who rebuilt it? thanks Tom
  8. T

    Evercoat Disaster

    Bought a gallon of Evercoat and hardener about 6 months ago. Pulled them off the shelf last Saturday to fill some low spots in my 29 PU cab. Mixed it as usual, applied it and when to eat lunch. Came back an hour later and it was still soft butter. Spent hours scraping it off with a razor blade...
  9. T

    Cab and Bed Wood

    How does one prep the wood for body color? Use regular auto primer and then body color or wood primer then body color?
  10. T

    Cab and Bed Wood

    Is body color correct for the cab and bed wood on a 29 PU? Also how does one prep the wood. Use regular wood primer and spray auto paint or auto prime and then top coat? Thank you
Back
Top