Search results

my 55 vicky 6 volt at times horn will blow other times not . it seems to be better with car revved up a bit.Could it bethe relay and is there a way to test?

where is the cheapest place for 4 600 16 www tires prefer in danada due to shippig..Thanks in advance

79 Ford granada jatco auto ****** need a 20 tooth speedo cable gear part no or if you have a gear..Thanks in advance

When i turn on my left or right signal all four lights flash...How are they grounded as that is a possibility i am told...Grounded just by being bolted to body or??

79 Granada changed differential from original325 to 272 as that was all i could get..works fine but speedo out about 10 mph..Now is there a different gear for end of speedo cable that can fix that or??? If so where could i maybe get that part? The ****** is a jatco 6000 i beleive..Thanks in...

installed new master cylender per all instructions and now brake pedal dont come all the way up..i adjusted the push rod from mc to pedal all the way back and the pedal is about an inch from the top..I can lift the pedal up with my fingers but it just falls back down...Got about 3/4 pedal and...

Who sells a 55 master cylender manual brake fairlane with 272 engine..Told there is a lot of china junk out there that i dont heed...Thanks//

So before getting myself in trouble by adjusting something wrong can someone tell me why my 55 crown with standard steering seems to have to much play...With car sitting wheels straight ahead seems like 1 and half inches free play in wheel before it starts to tighten up but when driving it seems...

Want to try and get some play out of steering at straight ahead steering ..Hope a can get some with the screw on top of steerin g box but when i loosen lock nut i can not turn screw ..I see like a atar washer under the lock nut and sure this is the problem...Could someone explain and tell me if...

Can someone tell me where i can purchase a ring and pinion fior a 79 Granada with 2.79 gear ratio..Looked all over the net to no avail..Thanks

New in package chrome windsheild roll out handle for 35 -36 Ford..Probably fit others i beleive...Dont really know how to post pics on here yet so??..Would need zip code to get a shipping quote

s there an easy way to instaLL A MECHANICAL OIL PRESSURE GUAGE ON MY 272 VICKY ENGINE AND KEEP THE DUMMY LIFHT AS I DONEALLY TRUST THE ORIGINAL AND DONT REALLY KNOW MY OIL PRESSURE /

I have about 3 inches play on the steerin wheel of my 55 crown so how much is it safe to adjust the set screw on the steering box without doing harm to the interior of the box..

79 granada with engine rebuild new bearings rings and lifters TWICE ..Engine startedout with what sounded like lifters so thinking i may have got bad ones replaced those to no avail. it now sounds like no oil up top but after removing top pan i find lots of oil at an idle and oil pressure is...

coming home from meet today my vicki suddenly stopped on the road as if someone pulled the coil wire..Got under hood and all wiring seemed in place and could see nothing wrong..Got in and tried it several times and all of a sudden started up and ran fine...It was very hot today but temp guage...

is a 55 crown vic wheel compatable with tubeless radial tires??

Ok i got and installed a new neutral safety switch on my vicky but now how do i adjust it..It will start in reverse now so where now?? There is a bit of adjustment via the slotted hole in the switch so will i get enough there or it looks like i could loosen the mounting bracket on the steering...

I must work the shift lever up and down until i hit the exact spot for starter to engage..So if working properly something would hold it in that position would it be the switch at bottom of column something in the dash or ****** ...just wondering what i need to make it work properly..Thanks...

anyone know where i can purchase a set of 12 oem lifters for a 79 granada with 4.1 engine as the aftermarket ones are to noisy..

79 granada chatters for about 5 minutes on start up ..sounds like liftersWhen checking with tappet cover off two seem to be completely drained down or flat so is that normal?? Engine redone with all new lifters so wondering as i know not bearings..Any help appreciated..PS With hood closed...