Search results

Got two kinds of hub caps. Pretty sure the round ones are for the 39 pu. The others, flatter with a ridge around outer most edge Also,found a 46 Merc hub cap if someone needs one.

I have a 1953 engine (maybe truck engine) in my 39 puand am trying to get steering working. Seems like link hooked to steering box arm is gonna hit the pan? Are there different pans? Change pans, modify tie rod-like link under the pan, dent pan in some? Thanks for suggestions!

Trying to wire my 39 pu. Lots of boxes under dash. Have parts from 6 38-39’s and one nearly new harness, but colors are bad and diagrams unclear. What are these items please. Seems like horn relay, some pieces have a resistor, only one has resister and fuse. Some of the boxes have points in them...

Sure I’ll remember……NOT. I seem to have two ground wires ( bare copper) and a wire from condenser to little nuts on points. Where does 6v to points come from? In other words, someone have a photo or maybe better, an explanation of what goes where. Only have one 53 dizzy, so nothing to look at...

Since I gave up on the 39 PU without a title, had to find somethin' to do. Had a garage "kit" laying around. Finally put it together.....been cold work, but ready for siding! Learned NOT to build my own garage,that there is too much county interference, and the $30,000 local builders wanted to...

I usually post in Early V8, but some over there though some one here might recognize these things. Please notice the glass. Thanks, Gordon

PLease note the glass - its hard to see Gordon

I have been working on a 39 PU. Thought I had a frame with a good ohio title but found #'s don't match. I have an old Colorado title for the frame # that was signed in the wrong places. DMV says I need to post a bond (ok by me). They require a certified inspection first, then a title search...

http://www.foxnews.com/leisure/2015/04/13/123-model-t-ford-convertible-skids-off-road-killing-couple/?intcmp=latestnews Watch out for old cars. G.

Just read thru 14 pages of posts, and didn't find quite what I needed. I would like to replace the 4.11 rearend in my 39 Ford PU. The only "higher" rearend I've found on which the input splines are good, is from a 46 Merc. Is it possible to use the banjo from the Merc, and the bells and the...

Just wondering why my 39 PU # starts with BBxxxxxx It definately/was is a 1/2 ton PU. About time to start arguing with Colorado DMV...... Thanks, Gordon

Sorry, I realize I have ask some of this before, but I'm still confused (easy to confuse me I'm afraid). I've attached a photo of what I started with. I've looked at the photos I can find on the forum - may have missed the right ones.... First, ebrake cable. Some photos show it clamped to the...

Stainless solder? Silver solder? Used have a welder at the plant that could weld razor blades - not me. Thanks

Many times on the forum, I've seen "never throw anything (or nuthin') away. Not to be morbid, but what do you think will happen to all our "valuable" Ford parts when we're not here any more (I ain't in a hurry). "I didn't have the heart" post made me think about this. For instance, my son...

Mainly just venting! Someone on FB said you'll learn new swear words doing a windshield. Amen Found some great info on FB so I thought I'd try it. Tore the tape and finally, broke one glass. More tape on the way. I thought, well, I'll play with the outer seal and see how that goes in - just a...

I see some encased, some not. Have not seen grommet for the non-encased - maybe grommet built into rubber encased ones? A while back, Kube put up a nice photo of encased one in 40 ford. Thanks, Gordon

Didn't want to hijack Mike B's thread, so I'm wondering if these things normally stick or break in the head? I have an intact one I want to remove from an old engine and use in my 8BA. Also, it came up in Mike's thread that the 8BA has a fully tapped hole - will the bulb from an older...

Anyone have a photo of what the arrangement of wires and "stuff" in front of left front corner looks like? I know the gas line will go there, as well as the wires. One wire seems to "loop" thru the headlight harness and the back to the body wire - seems odd. Seems to be an extra clamp too...

Cable in stash. Thought someone might need the bracket if anyone knows what it is. Gordon

I've never seen for sale a seal where the steering/worm shaft goes in the boxes. I recently took apart a 37 steering assy and it had paper washers on the shaft (photo below). Are these needed?