Search results

Twice today on starting the starter engaged, engine did not catch but starter whirled until rapped with mallet? Cause? Thank you Tom

Have a 29 Briggs that has been converted to 12 volt. The wind shield wiper is an original 6 volt. It works fine when connected to 6 volt battery. However when hooked to a voltage reducer it will not operate. Ground is good and lead from the voltage reducer is good. What am I missing? Thanks Tom

Hung the doors early this week. Driver door after a bit of adjustment closes/latches and opens nicely. The passenger door how ever is 1/2 inch low at the latch. My understanding is that to lift the door shim the back of the cowl. Question is how as the PU body block is long running under the...

Hung the doors this past week. Driver door aligned after a few latch adjustments and open/closes well. The passenger door is 1/2 inch low at the latch. My understanding is that the back of the cowl needs to be shimmed up. Problem is how. The body block is long running under the cowl and the door...

Bought a gallon of Evercoat and hardener about 6 months ago. Pulled them off the shelf last Saturday to fill some low spots in my 29 PU cab. Mixed it as usual, applied it and when to eat lunch. Came back an hour later and it was still soft butter. Spent hours scraping it off with a razor blade...

Is body color correct for the cab and bed wood on a 29 PU? Also how does one prep the wood. Use regular wood primer and spray auto paint or auto prime and then top coat? Thank you