Recent content by georgewatson396

Thank you Craig for confirming what I suspected. I have also checked the Moog part #'s for the 69 steering arms and found they are the same as the part #'s for the 67 steering arms. So thanks again for your help.

Does anyone know if the NON power steering arms (from the pitman arm to the ball joints) from a 1969 Mustang will fit onto a 1967 Mustang? :confused: thanks, George

Greetings, Will 69 Mustang front spindles and Brakes fit on 1967 Mustang? What parts can be used and what must be done to make it happen? I have access to a 69 front end. I would like to change the 4 bolt pattern on the 67 to a 5 bolt pattern. I don't need the Grenada disc system. Thank you for...

Has anyone attached a 90 to 93 T5 transmission onto a 67 or 68 390 motor. What clutch/bell housing should I use? Is there a kit to make this work? Any info will help. This is to go into a 67 Mustang. Cheers, George

Thanks, I had a 97 Explorer axle kicking around my back yard. I dragged it into my shed. It has 373's so thanks. Do you know what brake master cyl I should use if I use Grenada front discs. Cheers George

Im buying a 67 T bird for the motor. I am told that car has a 9.375 inch strong rear axle. I want to put that rear axle into a 67 Mustang. The normal width of a 67 Mustang nine inch rear is 59.25 inches outside flange to outside flange, I cannot find how wide a 67 TBird rear axel is from outside...

I have A 1967 Mustang coupe driver's door that won't open. The key is hard to turn in the lock. The locking pin on the door top goes up and down but it just stays shut no matter what handle I pull. The rod moves in the door from the inside handle but no cigar. Any Ideas?:confused:

Thank you Darrell for the excellent idea of the Granada discs & spindles. Do you know what year the Granada was that the parts came from? Geo.

I bought a 1967 Mustang. It has 4 bolt brake drums. I am putting a rear axle in that has a 5 bolt pattern. I therefore need to change the front brake drums to a 5 bolt pattern. Does anybody in Fordbarn land know what parts besides the drums need to be changed? Are there different sizes of drums...

I bought a 1967 Mustang. It has 4 bolt brake drums. I am putting a rear axle in that has a 5 bolt pattern. I therefore need to change the front brake drums to a 5 bolt pattern. Does anybody in Fordbarn land know what parts besides the drums need to be changed? Are there different sizes of drums...

Is there a way to identify the year or CID of Ford big block motors(from the 1960's) by some kind of markings on the block? I know chev has casting #'s at the back of their blocks but what about Ford? I put out an ad wanting a 390 or 428 Ford motor and am getting responses from people who...

Greetings, Does anybody in Ford land know or can remember if Carroll Shelby was at the Daytona 500 Stock Car race in Daytona beach Fla. in Feb of 1967? I vaguly remember a tall guy in a black stetson sitting in a rounded bodied dark green sports car that I now know to be one of the original...