Search results

I'm going to replace my floor boards in my 28 tudor and was wondering if there was a pattern to go by. And if there is where do I get it. I don't want to use my old boards for a pattern because they were home made and not accurately cut. thanks Joe

1928 Model A Ford for sale. Check out at MARC web site Classifieds.

Rad question, will a radiator from a 1928-29 A fit a 30-31A ?

Awhile back there was a lot of discussion about using a air filter on a Model A. The only thing I found avilable is a big ugley, clunky air maze that doesn't fit right. I tried various ways to secure it to the carb without success. I put a safety wire on it so when it does fall off I don't lose...

If you look at the picture of my 28 tudor you will see that the radiator isn't centered between the headlights. The space between the headlight and the rad on the driver side is wider than the space between the headlight and rad on the passanger side. You never notice it until your looking...

Looking for a bumper guard 1949 Ford front passenger side in nice or rechromed shape. PM me

Wanted, 1949 Ford passenger side front bumper guard in good shape. Rechromed ok. PM me. Joe

Talking to a friend that has a 49 Ford tudor sedan about changing out the ******. I thought they had (like many cars back then) a panel above the ****** in the floor that was removeable. Before we get started on this, I thought I would ask, is there a removeable panel in the floor or is the...

I know I should know this by now, but I don't. What does the letters AR refere to? If it referes to early 28 As, whats the difference between early and late 28 Model As. Thanks for helping out a semi-newbe.

Got a friend looking for a nice set of bumperettes for a 49 Ford car reasonably priced. Pm me if you got a set available. Cancel this request, found a set.

I have a 28 tudor with a rebuilt motor with less than 300 miles on it and a bran new heavy duty radiator. Also a 160deg. thermostat. The engine runs right at 160 deg. If I am sitting in traffic or climbing hills it will creep up to 170 to 180 deg. which is fine. What puzzles me is, it pushes...

I was at the local NAPA store the other day and I noticed a product there selling called Star Tron (an additive) that supposed to cure and prevent the problems that Ethanol causes. A little pricy at 15.00 for an 8oz. bottle but it treats 128 gallons of gas. Just wondering if anyone else used...

Just thought I would pass this along. Over the weekend I was helping my daughter move and I had the 03 GMC pickup loaded to the hilt. Here in western Pa your either going up hill or down hill Well, I was going down a long steep hill loaded down when a rusty brake line decided to let go. At the...

I have one narrow band 21in. wheel. I'm told they were used up to Sept28. offer+shipping. PM me if interested. My mistake, should have been posted with A parts.

I have one narrow flange 21in. wheel. I'm told they were used up to Sept28. Make offer + shipping PM me if interested.

Just noticed that the rear fender braces on my 28 tudor are missing. My question is, do I need access to the inside of the body to bolt the braces in place. Or, are the nuts tacked in place so I can just take the bolts out without having to get to the inside of the body. Might sound like a dumb...

Quick question, How does the drive shaft bearing in the front of the torque tube near the speedo gear get lubed? Only grease fitting I see is on the univesal joint cover. Thanks Joe

I have a strong vibration when I let off the gas.Most noticeable going 35 to 45 mph. What would be the first place to look?

This is a hub puller designed to pull the shoulder type hub. NOT the more common grooved hub. Like new, used twice. email harleynut45@gmail.com 22.00 + shipping

I need to replace the grease seal in the drivers side of the axel housing and was wodering if there is a way to get the old one out and the new one in. I was thinking about a piece of pipe with a large washer on the end. Or do I have to buy the the driver tool?