Search results

I believe this dash light came out from under a 34 Ford Dashboard. But I maybe wrong. Can anyone recognize it?

I have the following new and used hardware (Correct nuts, bolts, clips, screws) leftover from the restoration of my 1934 three window that I recently sold. All parts are new unless listed as used. I would like to sell the parts as a complete package rather than separately. The cost of...

I have the following new packaged rubber and neoprene 33-34 parts left over from my 34 restoration. These parts are from Mac's Auto Parts and Vintique. Selling as a package. Rear Window Seal/Unbonded/92" Pair Headlight Lens to Bucket Gasket 27" Neoprene 32-34...

I've had this behind the dashboard lamp for a number of years. I thought I removed it from under a 34 Ford dash board. Can anyone help me identify it. Thank you, Tom

I have two front bumper brackets that I believe are 33-34 Ford. The distance between the two oblong holes on either the right or left brackets is 16 3/4 inches. Can someone measure the distance between the two bolts on either side of their 33-34 front bumper and tell me if the distance I have...

I mistakenly purchased a pair of front bumper brackets for what I thought was for a 33-34 Ford but they didn't fit. The brackets are stamped with the nos. 278 and 277 on the inner and out pieces. I'm wondering if these are correct for 35-36 Ford front bumpers. Does anyone recognize the...

A very small tip (1/8") on the greyhound had to be soldered back together and is hardly noticeable after painting the joint with chrome paint. The rest of the chrome is flawless and looks like new. Please send email address for photos. SOLD!

For sale I have a new never used Vintique side rear view mirror. Vintique discontinued producing these side view mirrors in 2014. They attach to the cowl light. I'm asking $150 for the mirror plus shipment. I can email photos to anyone interested. Sold!

......................................................SOLD..................................................................I purchased my 34 Ford in 1973 and over many years of working, being married and raising three kids I finally completed restoring the car to original condition. The...

I have a pair of nice vintage Fog King lights I would like to connect to my 34's electrical system. I have an Arkless switch but it does not have a fuse in it. If any one has added fog lights to their 34 I would appreciate any tips on how to do it correctly. Thanks in advance, Tom

Having just completed unclogging the temperature side of my dual temp gauge I'm wondering what kind of sealant to use when replacing the air tight nut to the top of the reservoir where the red fluid is added. Previously I used white teflon tape but when I cleaned the gauge I noticed a white...

Following the many posts on Ford Barn I was successful in unclogging the small tube running from the top of the gauge to the lower reservoir. I am preparing to add the hydrostatic red fluid back in the reservoir but before I do I would like recommendations on the best sealant to use when...

I have a 34 Ford coupe with the light switch and horn button riding too high on the steering wheel. The gap between the edge of the switch and the top of the steering wheel is 1/4 inch. I have taken apart the lower unit at the bottom of the steering box and made sure the "C" clip is fastened...

I'm hoping someone out there can help me figure out why there is too large a gap between my light switch and steering wheel? The gap is about 1/4 inch. I've disconnected the lower light switch from the steering column and I'm wondering if the little "C" keeper is riding to low on the shaft...

I'm looking to have my 1934 Ford coupe pinstriped with its original three stripes. Is there anyone in the North Bay of S.F. who can do this?

I have three left over never installed wiring looms from my 34 three window restoration. The main loom is from Tyree Harris. The other two are from Mac's and include a cowl and headlight looms. Shipping extra. Sold!

Need a little help. I'm trying to install a new tie rod and ends on my 34 Ford and I'm having trouble getting the ends to slip over the ball on each side. Is their a special tool needed to compress the spring in the tie rod end enough in order to slip the two parts together? I've tried using...

Does anyone know of a replacement switch that can be used with a 33-34 interior dome light. I have a very nice original lamp, but the switch has gone belly up. I hate to put a repop in my car. Thanks

I'm trying to find a good replacement return accelerator spring for my 34 V8. The one I currently have does not have enough return left in it to allow the carburetor to fully idol. All the re-pops I see listed are for 35's and up. Thanks for any leads.

Has anyone out there found a source for 34 accelerator return springs. The ones I'm seeing advertised on the reproduction sites list the springs for 35 and up models. I've been told these springs don't work well for 33's and 34's. Thanks for any recommendations. Tom