Search results

Got a question for the fordbarn group. I got a 36 pickup truck withan ECA 53 motor, when I put the motor in I used the cast iron bell housing adapter from the truck application. My truck was converted to 12v and I had a 12v starter with the late bendix spring setup. This worked great with the...

Has anybody installed this system ? I'm thinking of using it - Presently I have a Holly 390 Thats work great- Just thinking EFI 36fordguy

Can I install a 36 clutch pedal on a 40 brake pedal assy

36 pickup with 1953 ECA Merc motor, Pass side will not get up to thermostat minimum temperature (180) . The driver side runs at 180 thermostat setting Both thermostats are new and checked them on the stove with boiling water. The pass side will only get up to 135. Checked with IF gun both sides...

I have a 36 ford pu witha 1953 mercury motor, griffin radiator. tha problem I'm having is the pressure cap I was running was 7#. The purge tank would not cycle correctly, I increased the pressure cap to 13# and the tank cycles correctly has anybody had this problem? 36fordguy

I have a 36 PU with a 16" electric fan. The fan is mounted about 3/4" from the radiator core as a puller fan (engine side) It seems like the fan is not pulling air thru the core but from the sides. How close should the fan be to the core to pull air thru the core?

I have a 36 PU with a 16" electric fan. The fan is mounted about 3/4" from the radiator core as a puller fan (engine side) It seems like the fan is not pulling air thru the core but from the sides. How close should the fan be to the core to pull air thru the core?

Can I use one of these on a 8rt pan with a 53 mercury engine 36fordguy

Has anybody tried this combination ? I'm trying to get a little safety zone in before the coolant boils. The coolant requires an additional push over water 36fordguy

I have a 36 PU with a 59a engine. I have the heater coming off the pass side of the engine at the top of the head and the return going in at the radiator bottom hose with the standard fitting ford provided.(standard connection) My question is this set up allows the passenger side of the engine...

I want to buy some 160 degree thermostats for summer time but I can not come up with a part number. I was thinking of purchasing them from NAPA or Autozone rather than paying shipping on two small items. 36fordguy

I just purchased a new Pertronix 1285LS kit. I was wondering if anybody had any experience with this module. Mainly how do you set it up and get it on TDC before installing the distributor on the car initially. I emailed Pertronix and they said install the dist and connect it up and connect a...

This is hard to explain. I have a 36 ford pickup with a 59A motor. I installed a 12V starter with the late model enclosed bendix spring unit. After driving the car for about 1 yr the starter failed and is locked up. Trying to rock the car to free the starter does not work it is still locked up...