Search results

Hi guy's Went to install the carpet on my 30 deluxe coupe...After looking at it for a few minutes,,,it look's like the rubber mat to protect the carpet is on the wrong side !!! I'am thinking it should be over under the...

Hi guy's If I don't start the engine for a long time...It won't start ?...I traced it down too slight corrosion on the point's...As I live close to the Ocean,How do I prevent this,,,Put a small piece of paper between the point's ? Also what's the best way to...

Hi Guy's, There was a "post" about a Pinto engine in a Model A....I seem to remember at a Swap meet year's ago there was this Believe it or not A Pinto with a A or B engine in it I remember it was at the A or T swap meet...

Hey Guy's For the Ford Guy's here in So. Cal. next sunday (April 22 ) is the All Ford Day at Knott's Berry Farm... I went last year & it was great. It's for any year Ford from 1903 to present...Yes,,,there was even a row...

Hi guy's I looked at the quarter window's rubber seal with the new Safey glass in place..Just not a good fit as far as sealing water out ...I check the old plate glass thinkness & it's not that much difference from the new "Glass" I can push the glass in...

Hey guy's,,, Was looking at the latest Hemming's & they did a write up on the 31-32 Chevy's..They "kinda" down played the Model A Vs. the Chev's I'am thinking the Ford's were a better car,,,such as a bearing where Chev used a...

Hi guy's,, I noticed in the first page of the Jan. 28 service bulletin's about setting the point's & timming. It call's for .015 to .018...I know it was latter changed to 18 to 22... My old VW manuel called for .016...

Hi guy's What will carry the load better, a straight weight or a multi grade ???...I've alway used 30 or 40W ...in the "A" Just can't see using the real low numbered multi say 5-15 weight...Some of that stuff is like water to me...

Hi guy's,,, While looking at my A part's catalog, I noticed the front hub seal ( A-1190 )...I alway woundered why there wasn't some sort of seal for the front hub's..Mine must of been tossed long ago. Where does this "seal"...

Hi guy's Install new glass in the quarter window's (30 coupe)...not as tight as I'ed like it to be compared to the old plate glass..Is there a easy fix, say something under the window frame ? Thank's, Greg

Hi Guy's,,, Thank's to all those who offered suggestion's on what might be wrong with my "Stiff" steering...I think I found the problem,,,Took the tie rod off...One wheel turn's fine,,the other is real tight ...

Hi Guy's,,, I went to install the drag link on my 30 A...I think I had it right, short "opening" to the front...I'am using the new Nylon "kit"...all the ball's have been replaced... Wow,,,something's WRONG !!!...I can...

Hi Guy's Went to install the steering wheel on my "30"..It's been so long, I don't remember what is the correct position..Are the spokes at a 45degree angle so you can see the speedo in the straight ahead position ?. Has 2 keyway's on the wheel...

Hi guy's About ready to install the headlinner...What's the best way to get the wrinkle's out before I put it in ?. Thank's, Greg

Hi Guy's I'am working on the last part's of my 30 coupe..I've forgotten what size the hood rod's are for the side pannel's ?. Are they 1/4 inch rod's ?. Also how does the windlace go in at the top of the body ?. Is it...

Hi Guy's,, Does anybody know if "Bob A" ( Robert Barkely ) is Ok ?...He lives in Florida..Haven't heard from him in a couple of month's Thank's Greg out West,

Hi guy's, Looking at the picture's of "Elmer's" trip to Calif,, I see his sister lived in Wilmington,,,And the next picture there's Elmer standing on the breakwater in San Pedro,,Was I surprised ??. Ford had a assembly plant in Long Beach...opened in 1930...

Hi guy's, Went to install the radiator brace rod's & they are too short...This is for a 30 coupe...The rod's are original & about 25 3/4 long...I'am thinking the radiator bracket is sodered in the wrong place ? Anybody else had this problem ...

Hi Guy's,, Does anyone know if a grease seal can be installed in the front hub ? Why was it left out ?.. I wouldn't call the steel baffle a "seal" ... Greg out west,

Hi Guy's Installed the cowl lacing on my 30 coupe...It looked kinda of thick ( 1/2" ) compaired to what I removed ( 1/4 to 5/16" )..This I got from "Rick's" long ago & am just putting it on now... I did a trial fit of the...