Jerry Parr WI
Well-known member
Gar, in the Model A Judging Standards, Copyright 1981, on page 1-1 at bottom Right, it says.
"Quote" Most cylinder heads had no Ford script and few, if any markings. Ford script heads are acceptable through mid 1928 only. After mid-1928, Model A cylinder heads had no numbers or letters on them. Other after market heads will appear identical to the factory original heads, except they may have raised bosses with numbers or letters. "End Quote"
Ford was real touchy about someone using the Ford name on after market parts. A good friend of mine who lived in Omaha, Mel Alexander also told me that those heads were Model A AR. So if that ford script is not Early AR, what do the Early AR's look like, as that head is the only Model A head style I have seen with Ford script. If I am mistaken, I would like to find out, I am going to keep digging in my Model A books, and see what I can find, give me some help Guys, see what you can find. thanks Gar, Herm.
Diamond blocks are date coded and the diamond heads are also date coded. If the head is a diamond head then the tag on top would indicate Mar 12, 1937 manufacture. This date would also be consistent with the large oil filler tube in the block which appears on other diamond engines. The judging standards deal with era production practices but Ford script on post production replacement parts is not uncommon. An early script head would not be date coded so post production service part would seem likely. Generally early script is quite large where service parts have small script as shown on this head.