NEW products available thread

Michael -Get a small twist drill and rotating it between your fingers bore a hole through the base of your thumb nail above the darkest area . Stop when you get blood . It will allow the blood and pressure to escape from your subungal haematoma and hopefully save your nail -Karl
 
Karl said:
Michael -Get a small twist drill and rotating it between your fingers bore a hole through the base of your thumb nail above the darkest area . Stop when you get blood . It will allow the blood and pressure to escape from your subungal haematoma and hopefully save your nail -Karl
Click to expand...

You get EXTRA points for putting that drill in the drill press and doin' it like a "man"! DD
 
Karl Wescott said:
Hot out of the foundry (well warm maybe), 1935-36 Coupe/Roadster/Cabriolet trunk hinges. Made in USA (Oregon specifically). 304 stainless unpolished. Can be polished, painted, or left as is.
Click to expand...
damn those are nice. some really nice work being done here on these pages.
 
35fordtn said:
Just had these made up. 41-48 Hood latch dowels. Made here in Tennessee out of stainless. The cupped washer and spring will be done soon... stainless as well. Pictured is next to a original (excuse my black thumb recently smashed by a hammer)
Click to expand...

Man I had a heck of a time finding a good pin, cup, and spring a few years ago. My friend had one on a spare '42 hood he had stored. I wound up trading him for some '49 dash knobs.
 
I’m sure he won’t mind; in a recent phone call with Mac Van Pelt he mentioned he made the tube that goes into the fuel pump stand. These have are machined on one end to fit into the block. We all have old fuel pump stands missing these tubes so this is a simple yet needed part. Contact VanPelt sales if you need one. Last photo is one I installed tonight next to a original.



05ca71cb76c99d46c339ba3ecc737c4b.jpg

b1a02ee11e2e399dc2def6024740afa6.jpg

10336ada5411cff28c0e212087b3fda2.jpg



Sent from my iPhone using Tapatalk
 
35fordtn said:
This week I had a itch to have some 35/36 car and 35-39 pickup headlamp nuts made. They are exact as original awaiting plating. Odd size that’s unavailable these days.
38e55f61ad4d4ab2993ad6d919018893.jpg



Sent from my iPhone using Tapatalk
Click to expand...

You guys are killing me here! Such beautiful parts, and I'm guessing not for huge profits, but as a way to add in part to the legacy of our great vehicles.... And as for McMinville Tennessee, I just finished a complete resto of my powermatic model 66 tablesaw which was made there in 1978. Had to do it over last weekend because during the week I can't earn a dime without it.
 
GB SISSON said:
You guys are killing me here! Such beautiful parts, and I'm guessing not for huge profits, but as a way to add in part to the legacy of our great vehicles.... And as for McMinville Tennessee, I just finished a complete resto of my powermatic model 66 tablesaw which was made there in 1978. Had to do it over last weekend because during the week I can't earn a dime without it.
Click to expand...
green with a white stripe? still my favorite saw.
 

Attachments

  • post-15062-0-99422200-1390177824_thumb.jpg
    post-15062-0-99422200-1390177824_thumb.jpg
    26.2 KB · Views: 1,521
GB SISSON said:
You guys are killing me here! Such beautiful parts, and I'm guessing not for huge profits, but as a way to add in part to the legacy of our great vehicles.... And as for McMinville Tennessee, I just finished a complete resto of my powermatic model 66 tablesaw which was made there in 1978. Had to do it over last weekend because during the week I can't earn a dime without it.
Click to expand...

Yes that saw would have been made here. Powermatic has since moved. Interestingly in 1978 they were owned by Houdaille industries (same company related to the shocks on our early fords). I found a Houdaille industries sign at a local yard sell and never knew the connection to powermatic until recently
 
35fordtn said:
Yes that saw would have been made here. Powermatic has since moved. Interestingly in 1978 they were owned by Houdaille industries (same company related to the shocks on our early fords). I found a Houdaille industries sign at a local yard sell and never knew the connection to powermatic until recently
Click to expand...
i have a tennsmith 48" finger brake that i think was made there too.
 
A new product i have recently made
Flathead V8 finned coolant pipes. [ Fits in between Radiator and heads ]
 

Attachments

  • P1150961 (5).jpg
    P1150961 (5).jpg
    27.1 KB · Views: 1,402
  • P1150963 (3).jpg
    P1150963 (3).jpg
    39.8 KB · Views: 84
  • P1150863 (3).jpg
    P1150863 (3).jpg
    32.3 KB · Views: 65
Those look nice, but what years are they for? They appear to be too short for '32-'36 and not curved enough for the later models. I would also like to see a set installed.
 
You must log in or register to reply here.
Back
Top