Search results

I recently developed a nasty squeak/squak in my left front suspension really annoying. The car has all new components. Was wondering if anyone has had a similar experience and can provide information on what to look for and how to solve the problem?

With the fuel filler nozzles of today, am looking for ideas on modifying the nozzle receiver so the pressure is relieved when filling the tank on my 61 Ranchero. I'm currently looking at a Jeep CJ receiver. Has anyone tried modifying the fuel input on the early Ranchero and wagons? Any input...

Have 1935-7 rear window frame and good glass for sale.

1935 - 37 pickup rear window frame with glass for sale - $100

A few years back I installed a Halogen headlight kit in my 37 pu using stock lenses. Never was satisfied. Low beam just ok. Hi beam, no beam just a flood light. I've been told, that changing the bulb to an LED may provide a beam for both high and low beam. Anyone had this problem and if so...

Does anyone know if the heater box can be spit and a new core installed without removing the entire heater box blower motor and all? I have a v8 with "hang on air" and I didn't want to remove the whole setup just to replace the heater core. Any info is appreciated Thanks ... H. Smith

Need hood springs for a 63 Falcon. Anyone know where these are available or what can be used as a replacement? Appreciate any ideas...Thanks

Need hood hinge springs for a 1963 Falcon

Need a straight 1960 - early 61 Falcon lower control arm for suspension. Any help is appreciated. H. Smith

1965 Ranchero (1964 grill) -- $1700 • 5 lug rear axle • C4 trans • Good sheet metal & trim • Good interior • Have front disc brake kit - 4 lug • Have title • 6 cyl & 8 cyl bell housing • Engine, brake and steering components No motor Has bent right front sub rail (can be straightened) Restore...

I'm in need of a left front inner bumper bracket. During assembly I found the correct one missing. Thanks socalsmith

Anyone know where I may find a inner left front bumper bracket for my 1937 sedan. Am in the process o finishing assembly and discovered the one arm missing. Any help would be appreciated. Thanks socalsmith

The release spring in the emergency brake lever in my 37 sedan broke. I've seen return springs at ford parts stores for 39 forward. but nothing for 37's. Does anyone know of a fix? Will the 39 spring work? Any help would be appreciated. Thanks … SoCal...

Years ago I installed an after market Halogen kit (reflector, turn signal and Halogen bulb) in my 37 Ford PU using the stock ford lense. My problem is there is no high beam, it's a flood light. Has anyone encountered this same problem? Is there a modification to correct the situation. I...

Anyone out there have the measurements for the 37 flatback trunk support. Thought if I couldn't find one, I'd build the non-spring version. Haven't been able to find an aftermarket one other than the replacement power and gas versions. I'd like to keep it stock if possible. Any info would be...

The early 37 sedan I purchased, as a "basket", didn't come with a wiper assy. I tried to find an electric assy, but all products I've found will not fit without some surgery to the supports for the windshield. Does anyone have pictures of electric or vacuum assy for this car or know of an assy...

Anyone out there know what the stock early 37 windshield wiper Assy. looked like. I wouldn't mind using after market, but nothing I've found so far will fit because of the factory reinforcement brackets installed for the pop out windshield. Did the 37 have one motor to drive both sides...

I have, in my 37 flatback sedan, what appears to be a combination of 36 and 37 cowl vent parts. If some one has a diagram of the 37 cowl vent assy, I'd appreciate a copy. I've searched the web extensively and haven't found any adjusting level like the one I have. The bracket and hand lever...

Help...Anyone out there know where I can get a 37 - 39 windshield hinge mounting bracket? The 37 I purchased as a basket had one missing. Haven't been able to locate one anywhere....... Thanks Socalsmith

Anyone having a Fordomatic in a falcon, is it possible to get the transmission dip stick length and add/full measurements. Haven't been successful in finding a Fordomatic dip stick and want to build one. Thanks.....SoCalSmith