Search results

Inside metal door panels "oil can" pop in and out causing window mechanism to catch inside door, i imagine 80 years of using door pulls to slam door caused this. The metal door finger pulls had cracks on both sides, I welded them but didn't help .Anybody have this problem? Solutions?

Are the side window mechanisms interchangeable? Drivers side passenger side?

Replacing windshield on pickup. Cant get glass to settle in track with seal that came with glass' Are there different thickness of settling tape? I put seal on glass but wont allow the 2 half's of frame to come together.

My windshield frame on pickup is painted were they painted like grill or were they stainless or chrome?

Spare tire with 16 inch kelsy hays wheel wont bolt on to spare tire mount. The triangle plate is all the way up but its not high enough to allow wheel to go on. It is a 1935 mount! There is the small well in running board.

Have 1935 pickup spare tire mount someone cut off part of end that attaches to triangle plate. .Is there anyone that could give me the length from the base of mount to the triangle plate? Maybe use string or wire laid on top of rod so i could duplicate measurement? Thanks

Installing repo rear fender brace on 1935 pickup. Brace has 2 holes that go against body Ican only see one hole to mount it does it take 2 holes to mount? Any body have picture of brace mounted? tk you.

Looking to replace capacitor in 1935 pickup horn. Any idea where to purchase? Looked on internet no luck. What specs are needed? Some one had posted b-13814 as a part number but doesn't come up.

Does the horn only have one wire and to which terminal does it go? The one with the white dot or other one? I assume there is no ground wire since its grounded when horn button pushed? The bolt that holds horn on goes thru fender and has the rubber head light pad underneath, but does this ground...

Anybody have pic of where the small front fender bracket mounts to under the fender? I know the one end goes to square hole on lip of fender but looks like some holes may have been filled in for the other end. Looks like it could be mounted in two different places. Looks like one could use same...

Anybody have pic of the running board brace that supports spare tire holder on 1935 pickup. Doesn't look like they are reproduced?

Anybody have experience with the rear blocks of wood for back of pickup box? I assume square part of block goes up and sits on that u brace with that small cut out. Does it bolt to outside hole on frame or next one in? the hole in block seems to be at least 1/2 in but hole in frame is...

Going to use original fuel gauge with 12 volt system i know i need to put voltage reducer on. There's only 2 posts where do the hook ups go for gas tank sender/power/ground? Id like to chain gang with some after market 12 volt gauges. Also have this radiator i know doesn't fit my 1935 pickup...

Fan assembly seems to be leaking from back of shaft. Filled with 80 weight lube used procedure to fill let excess drain out but leaking from back of shaft with engine not running. Took apart theres no seal on end of shaft what keeps lube in? Was it over filled?Pulled shaft out seems to be in...

Any body out there have a solution for radiator for 1935 pickup other then brass works 1600. dollar and 4 month wait. Have 1953 flathead in pickup so it doesn't have to be original.Would like goose neck filler so i could have pressure system and top outlets coming straight out. I have the side...

No rust very straight. needs some repair look at pics. Local pickup.

Brackets are from inside of grill shell were bolted on shell 3 bolts per side . Are these in any way attached to radiator. I have no radiator.

Removed two long brackets from inside grill that has bracket for hood hinge was held in place by 3bolts on each side.I have no radiator for this pickup. Not sure if this attaches to radiator any where. Theres two holes at top of bracket one has solder on it are these brackets attached to...

Anybody have info on measurements for 1935 pickup radiator. Seen lots of pics but none with measurements. Need over all height and width. Thanks

Have a radiator that came with 1935 1/2 ton pickup not installed. Has 2gt with letter L underneath on back of top tank. Any idea what this is off of? It doesn't look like it would fit this pickup. It does have the outlets for flathead and top and bottom are 1/34 in.