Search results

I can not get the bolts holding rear motor mount to clutch housing out...ordered a thin wall socket which goes on the top bolt but socket wrench won't budge it....any secret here I don't know about

I was putting a new radius ball kit in....in putting in the new bolts in from hole, i had a string tied to the bolt through the cotter pin hole , it broke and the bolt has fallen forward toward the flywheel. I don't know if it has gone under the flywheel or lodged against it....I can not get...

Can I replace the radius ball bolts without removing the transmission from the car?

Anybody know who sells Model B oil filler caps?

I have seen red bakelite model a distributors on some engines...are they available?

I received 2 extra carburetors with my Model A....neither one has a brand name..The one on the left has "model XF" the other has "Made in the USA"... Can anybody help me identify the carbs?...thanks in advance

I am building a speedster with a wooden dash. I am not using a pop-out switch. Im using a pull out-push in switch. Im using basic Model A wiring, 12 volt, negative ground....My question is where do the two wires(red wire to coil and armored cable to distributor ) that go to a pop-out switch now...

Can anybody recommend a chrome plater fairly priced.?

I have a Model B oil supply tube which is larger than the standard Model A tube...I can not find a source for a B cap ...Anybody know of where I might find one?

My model A speedster has a B head. The water pump and water outlet are built together. My question is where can I install the water temperature bulb for a water temperature gauge.?

I am putting on a new fan belt on my A but having real difficulty because the space between the crank pulley and the spring shackles is too narrow. Any suggestions?...thanks

Need 2 good 21 inch wheels...hopefully close where I can pick up.