Search results

I am getting my steering column ready to install in a truck I am restoring. I have a rebuilt steering box I bought off ebay quite some time ago. I purchased a new horn rod for this steering box. The box is a 7 tooth so I got the horn rod which measures 45 3/4 from one of the major suppliers...

I was looking on Snyders for a new throw out bearing for my Model AA truck with a 4 speed. Their listing specifically said would not fir a AA with 4 speed. So I looked on a few outer sites such as Mikes, Macs, and Brattons and they don't say anything about theirs not fitting a AA with 4 speed. I...

Is it possible to change a oil pan out to a newer pan? I have a 1928 oil pan with the bottom clean out and it is in rough shape. I want to install a oil pan from a 1930 engine. Everything looks as if it will fit ok but just in case I am missing seeing something I thought I would ask. Thank you

Time to complete my restoration on my 1929 closed cab truck. I already decided the bed and fenders are not worth saving and recenty got the cab media blasted and epoxy primed. So the real story of the cab comes to light and Irealize it is probably not worth saving. So does anyone have a complete...

I am currently restoring a 29 closed cab truck. What is the best manual or book to get that shows the attention to detail items such as correct bolt/nut orientation, wire harness routing, clamp and hold downs needed and where? I want to make it as authentic as possible and there were many items...

I am rewiring my 28 model A Tudor. It is a single bulb headlight system. I purchased a wire harness from Snyder's so it is color coded correctly. My issue is the wires coming out of the headlights are not color coded. Someone just used red and yellow wire on the headlights. I assume both bulb...

I have a 1928 tudor. I am replacing the lighting wire harness and switch at the bottom of the steering column. The problem I am having is the very bottom of the steering box where the light switch fits into to mate up with the spider from the light/horn rod turns and causes the switch assembly...

Does anyone know of anybody in the central Illinois area thta pours new rod and main babbit for the Model A?

Is there a standard value the bolts should stick through the bell housing for the front radius rod attachment point. I replaced the ball on the radius rod and new seats and bolts. The book said to fit the ball in the socket and install sleeves and springs. Tighten nuts until they just touch...

Restoring a 29 pickup and replaced the front cross member. The front engine mount hole was beat up pretty bad so we welded it closed and re drilled it. It was worn bad enough that we really couldn't take any measurements to determine where its exact location needed to be. So with out best guess...