Search results

Cast iron bell housing. No known issues. $35. Heavy but I will ship the cheapest way on your dime. I accept Paypal. Thank you. Torchie

Hood spears and badges from a 1952 F6 truck. Good shape with no apparent damage. Some clips included. $30 I accept Paypal and I will ship. Thank you. Torchie

Mechanicals from a F series cowl vent. Screen is in good shape. All works as should No cover. $35.00 I will ship on your dime and I accept Paypal. Thanks. Torchie

Rear window glass from a 1941 Ford 2dr sedan. Good shape with no apparent scratch's or fogging I'm not sure that this is Original or not as I don't see a Ford mark on it. May fit other years and models as well. Do your research. $60.00. I will ship on your dime and I accept Paypal. Thanks. Torchie

Nice set of 41 Ford car Hood hinged. Arms and springs included. Nothing appears to be worn and the stud threads are not buggered up. I believe they are early production but do your research. $70.00 for the pair. I will ship on your dime and I accept Paypal. Thanks, Torchie

I am looking for a filled center grill panel for my 1941 Ford custom. These used to be made as an aftermarket customizing add on. I am hoping that some one has one before I start to make my own. See the pic for reference. I can be reached at funk4all@gmail.com or send me a PM. Thanks. Torchie

I know that the 48 Ford flatheads used the the long style pressure plates. I believe that Trucks used an 11" while cars used a 10" My question is this. Is the pressure plate bolt spacing different between a 10" clutch and PP and a 11" clutch and PP or the same? Is it the same flywheel and...

I am installing my clutch pedal linkage on my 1941 Ford car and I can't get the threaded rod to line up with the bracket on the pedal with out it hitting the pedal arm. I consulted my green book and the diagram for 1940-48 passenger car shows the bracket on the pedal that the threaded rod goes...

I just finished rebuilding the front suspension on my 1941 Ford car chassis. Now that everything works as it should the front of the frame sits quite higher than it did. Everything must have been frozen in the compressed position. How much of a drop can I expect once the Flathead and trans are...

Bear with me on this one as I have done a thread search and am some what confused.... 1941 Ford Chassis that currently has a non running 8ba in it. Rear oil pan sump with wide belt system. Truck pumps? Fits fine with no clearance issues. I am going to look at a running CAR 8ba. What will I have...

I am looking for a set (4) of the early Ford 15" steel wheel. They are the same 5 on 5.5 bolt pattern as the 16" I know that these were used for many years but don't want too wide of a wheel so some of the later ones won't work for me. Let me know what you have. Price,and pics if possible. And...

I am getting ready to restore the gauge cluster on my 41 Ford car. I have looked in most of the Ford parts suppliers and done some thread searches but I can't find anyone that sell the decals to replace the numbers on the speedo Any help would be appreciated. Thanks as always... Torchie.

I have a 1941 Ford dash and the bezel/trim piece that goes around the gauges and across the dash is one piece cast metal. All of the 41's that I have seen appear to be a 2 piece composite. Is this another early vs late production 41 thing or trim level dictated? This dash does not have a clock...

Hello all. My question is this. Does anyone know if there is any differences between a front spring pack and a rear spring pack for a 1941 Ford car? Length. Number of leaves. Anything. When I see them in catalogs they seem to be the same. Plus they seem to list them as 41 - 48 and i always...

What is the diameter of the spring centering bolt for a 47 Ford rear spring ? I was just out looking at the one that I have and noticed that the bolt is broken off.:eek: I am not sure what is holding it all together other than the spring cover but I believe that it has been this way for a while...

I am working on what appears to be a stock unaltered 1941 Ford car chassis with front and rear suspension and axles. The drum brakes on all four corners are the type with the hub on the outside of the drum. I was recently told that this style of drums was used on the post war cars only and that...

What is the procedure for removing the door lock from a 1952 F series passenger door. I can't seem to figure out what holds it in. Thanks as always. Torchie.

Did the 41 Ford cars have any kind of beaded welting between the upper and lower fender pieces? I have seen them with and without. I know that the stainless trim was an option. As well as early versus later. Just asking about the ones that didn't have the trim. Thanks as always. Torchie.

I have two heads for a flatty. One is stamped 59AB and the other stamped T9 I know what the 59AB is but what is the T9 from. My understanding is the T was a truck head but usually followed by 2 numbers. I checked a few other sources first but no luck. So here I am back at the fount. Thanks as...

Interior garnish mouldings for a 41 Ford 2dr sedan. Includes windshield and stainless exterior/metal interior center piece. And also wing vents. Some rust but will clean up to be regrained. $100.00 plus shipping. Contact via PM. Thanks, Torchie.