Search results

https://youtu.be/bJdlVNu3IrU After a three year struggle this Victoria is back on the road! It feels good to be able to hop in and go for a ride! Just need upholstery now. If anyone have some rear seat armrests let me know.

https://youtu.be/AK28x4Xt4q4 https://youtu.be/AK28x4Xt4q4 First drive in over 60 years!

My 1931 Victoria project continues...I had hoped to be on the road by now. I did end up purchasing a rebuilt engine and installed it. It came with new clutch and I sourced a nos ujoint that is very nice and not made off-centered. even before the new engine was in place I developed an issue...

Hello! Working on getting a 1931 Victoria back on the road. Engine was rebuilt but i dont know much about who did it etc. It does start but runs weak and sputters when you try to rev it. Spark is good, timing is good- have done it many times with nurex wrench. Known working carb was...

Hello, switched over from the 30 Victoria project to do upholstery in the 1931 sport coupe. I’m mounting new rumble panels. I found the top tab to mount them to. Is their other points to screw the panels to? The wooden support maybe?

Hello, working on getting this project running... when I mount the front seats should there be a cover of some type over this pan? Or is this a footwell for the back seat? https://imgur.com/a/I6kCncG

I ended up taking the pulley off to get access to the problem springs. It was a bumper clamp backing plate! Everything is back together now. This is going to be an interesting project! https://imgur.com/a/r7CC89g

Hello all, I’m working on a 1930 Victoria project and noticed the front of the engine is too high. The crank will not even fit in the pulley nut. I think these motor mount springs are not the correct ones. I have new ones on the way just wanted to see what everyone thought about it...