Search results

Looking for a 7HA-6264-B camshaft hub for an H series six cylinder. rdove2989@gmail.com

Need 1941-48 sedan passenger's side outside stainless windshield trim. No dents or bends. rdove2989@gmail.com

Looking for recommendations for a good indoor car cover.

Will a V-8 brake pedal retracting spring work in place of one for a 226H six cylinder engine? The "green bible" gives part # 6HA-2456 for the "H" engine. If not can someone tell me the length of the 6 cylinder spring. Thanks

Hi, I installed new door glasses and new anti-rattle strips on my 1948 two door. When I install the panel with the vent glass and new anti-rattle strips it seems to pinch the window and makes it very hard to roll up and down. I installed the strips even with the top of the panels and door. I...

I have a 1948 two door sedan. The scuff plates that hold the carpet and mat down were missing so I ordered new ones. Does the enclosed end go toward the front or the back of the interior? Thanks in advance

I have a 1948 2 door sedan with grey interior. Since Cartouche no longer reupholsters assist straps or any interior work. does any one know where I can get the correct material to get them done locally. I contracted them to try and purchase just the material that I needed. They told me...

Wanted: 1946-48 assist strap screws and washers. Need 2 of each in excellent condition.

Hi, Can anyone tell me if the interior sun visors for a 1948 super deluxe were originally cloth or vinyl and is anyone reupholstering the assist straps. Cartouche no longer does that. Thanks

Hi, Two questions: first is about the back edge of door weatherstrip - How far up the back of the door does it go? My other question is about the bottom window channel - Does the tab on the end of the channel go toward the front or the back of the door? I've attached a couple of pictures to...

I am replacing the 1/4 windows on my 48 tudor sedan. I am replacing the interior so I have removed the trim panels and the panels that the regulators bolt to. Should I have the regulator in the down or up position when attaching the glass to the regulator? I'm assuming down so that the glass...

I have a 1948 Tudor sedan. The original glasses were replaced many years ago and they don't have "bugs" on them. I am putting new glass in the car and would like to put "bugs" on the new glass. The windshield glasses still have the original "bugs" on them. Can someone tell me the location of the...

I'm installing new side inner trunk panels in a 1948 2 door sedan. Does anyone have pictures of how they attach? My original panels were missing. Thanks

1948 sedan three transmission...the first and reverse lever on the side of the trans seems to have only 2 positions...is that correct? The 2nd and 3rd lever has 3 positions. Just rebuilt the trans. Thanks for your input.

Hi, Looking for a driver's side window channel that fits vertically inside the back edge of door and is rivited inside to the back edge door. It needs to be drilled out. The felt channel fits inside this particular channel. For 1948 2 door sedan. Email - rdove@triad.rr.com Thanks

Looking for a center interior windshield retainer a '47-'48 two door sedan. If anyone has one in good condition, contact me. Thanks. Email - rdove@triad.rr.com

Simple question (I hope)...how do you remove the ignition switch from a 1948 sedan? Thanks

Hi, It's been a while since I removed the radiator from my '48 sedan and I can't remember how it bolts up. I think the bottom brackets bolt to the top of the frame but can't remember what the top brackets attach to. Any help or pictures would be appreciated.

Need 4 backing plate nuts, 4 screws that attach the brake line clips to the front crossmember and the locks and washers that hold the brake and clutch pedals on the shaft. Must be like the originals. (see attached pictures). If you have any of these please contact me. Thanks. rdove@triad.rr.com

Looking for a 1948 H-series 6 cylinder exhaust manifold. Heat riser flap must not be stuck.