Search results

I replaced my water pump block studs several years ago with allen head bolts. Works great but now forgot what size they are? Thanks

Looking for source for set of AA 1930 king pins and bushings Thanks

We have pulled the engine and it is at a re-builder. We would like to replace the U Joint. The transmission is still in the car. Has anyone unbolted and moved the ****** forward then removed joint or do we have to pull the Rear end out? Thanks!

Have a Kari-Keen trunk looking for the spare tire mount A photo of the mount would also be helpful for fabrication. Thanks

We have a 31 Slant with 16 inch Kelsey Hayes wire wheels. Looking to replace bias tires with Radials. Looking for suggestions thanks

I have seen these for sale it is a 2" reciever (for flags "wink") Says it replaces rear cross member. Would that work on a 29 CCPU ? Would like to use for Flag or a cargo carrier... Light stuff only. Thanks

Just spoke to FSI regarding Electronic Ignition. (we are installing on a AA) They recommend the Delco single wire 12V. Anyone know where to find the right one with bracket to fit the AA Thanks

Our family has a very nice 31 Slant. It has 16 inch wheels. We are looking for a recommendation of a shop to install tire well in the RF fender. Car is located in Western Kentucky near Paducah. The well would need to be modified so the wider tire fits properly. Do not feel local body shops...

Looking for a source to purchase a running board gate used to carry spare fuel etc. Anyone have a source? Thanks

I thought I would take a moment and bring folks up to date. In December "Rainmaker" Ron passed. Ron was a legend and Model A restorer, business man and just a kewl dude! Anyway In 1997 Ron picked up a '31 slant that was in rough shape and began a frame off restoration. Ron named the car the...

Adjusting cross shaft play on F-100 steering box. It says to disconnect the pitman arm then adjust. Procedure after that seems the same as on a 2 tooth box. Can you do it without removing arm? Thanks

Have a valve cover mounted oil filter on a 31 Slant. Has a Motorcraft FL-14 oil filter. Will a NAPA 1515 fit? Unable to locate the Motorcraft is a very old number. Thanks

Trying to grease a 31 SW with org. grease zerks. Been unable to get grease in through them. Is there a trick or special tool? My truck has modern fitting and no problem greasing with hand grease gun. Thanks

We just finished replacing the timing gear and pan gaskets on a 31 Slant. Prior to taking apart there was an oil leak around the junction of the timing gear inspection cover and the pan. There were other leaks and now those have been corrected. Oil still leaking around the bottom of the...

FYI: The Heartland Model A Touring Group Website in on line and accepting membership applications. (Dues $5.00/year) Check out our Website. Spring Tour is in planning stage with Tentative dates of April 26-28. This Group once Chartered will be a MAFCA Special Interest Group. MAFCA is...

Rainmaker Ron had a very unique 31 Slant Deluxe. He acquired the car as a barn find in the mid 90's. This car was Ron's favorite ride. I always enjoyed my time with Ron. He loved to tell stories. Ron's car named the X-31 (he actually made the stamp for the plate!) It is now being well taken care...

Have oil leaking bearing center main bearing bolt. Any fixes without tearing it down. Sealants etc. It is not a huge leak just messy one. Thanks

It is with much sadness Ron Cloat aka Rainmaker Ron has passed while at the final meeting of the club he formed. (Fourever Fours). Peoria Il.

While doing brakes on a 31 Slant I noticed a pesky oil leak. Oil is leaking on the right front of the engine in the area of the timing cover and running down the splash pan. No oil is on the left side of the engine pan bolts or pan. Is this a major chore to replace timing cover seal and...

I am in the process of forming a New MAFCA Special Interest Touring Group. So far there has been enough interest to continue the project. The group if formed would be called: Heartland Model A Touring Group (MAFCA) Interest has been expressed to form a group that would focus on shorter...