Search results

Does anyone have a phone number for Cubel Ford Wood in Utah?

As the title says, I am looking for advise on installing the new gear on the camshaft of my Model A. Pressed on, tapped on? Thank you in advance.

I have a 1931 Model A with a noisy speedometer head. It functions fine and the noise comes from the head, not the cable. Is it possible to lubricate it or is this a job best left for professionals?

My long style generator has suddenly started needing to be "re-polarized" each morning in order to charge. Brushes, battery, wiring and ammeter are all fresh. I use a stock style cutout. The connections, including the brushes, are clean and snug. The battery never goes dead, the car starts and...

After replacing two ammeters, sourced from a quality vender, I am looking for a better quality item. The needles fell off of both of them. Are everybody's the same? I would be fine with paying a higher price to obtain this necessary item.

Does one glue the welting down on one side or leave it loose?

I have to remove the fuel tank from my 1931 Coupe and really don't know where to start. Any suggestions would be appreciated. I am studying the section in the Les Andrews book. Any parts I should order beforehand? Thank you in advance.

I don't know what order it goes in. Sorry if it is not clear what I am asking.

I have a 1931 Coupe with no wiper motor. These were included in a box with it. Is the lower one what the coupe would have used? If so, any idea what the other two are for? Perhaps they could be barter material for what I need? Thank you in advance

Thank to all of the advice here that led up to today. Back on the road after who knows how many years. "We aint afraid of no gravel roads"

Does it matter which horn wire is which? My horn has been altered to have two red wires! Thank you in advance.

Other than the trouble of finding an old timing light that will work on our cars, is there a reason that more people don't time the ignition that way. Once the pulley is accurately marked and a timing scale is installed, ignition timing is so simple. No more question about "what is what" with...

Can someone please tell me what is the clock position of the headlight switch lever supposed to be when in the "off" position? Thank you in advance.

After re- wiring, I know I have the leads reversed, but I am not sure if it is at the terminal box or the gauge. Which side is which? Thank you in advance

Can anyone tell me if the tail light/brake switch harness is routed over or under the brake cross shaft? Thank you

I have decided to undo a multitude of prior " repairs" to my 1931 Coupes wiring harness and replace it. Does anyone have a preference and why for a vender? Thank you in advance.

I am installing a modern starter drive, already having had to fish broken parts of an original style drive out of the bellhousing. I am confused as to what retracts the drive after the starter stops turning. Thank you in advance.

No longer needed. I found one

If I understand this correctly, on a rebuilt engine, I should put two quarts of oil down the distributator hole to fill the lifter area and the dipper tray. Is there any reason not to put all five (or 4 1/2) quarts down there? Thank you in advance.

Do the engine splash pans go under the frame lower lip or on top? Thank you in advance.