Search results

  1. ModAfan

    Name of item please

    Anyone know what this contraption is called? Also, should the rod on the top right be bent? Thanks.
  2. ModAfan

    another radiator question

    Any suggestions on how best to clean a radiator that is out of the car? My engine is being rebuilt and I’d like to clean the radiator before it goes back into the car. Thanks.
  3. ModAfan

    Mid-'28 Tudor for sale

    For Sale: Mid-1928 Tudor in excellent condition, except that the original engine has a Babbitt problem. The engine starts and idles but knocks on acceleration. There are flakes of Babbitt in the bottom of the oil pan. The brakes screech a bit at times. The car was restored in about 1985. Between...
  4. ModAfan

    Pictures to go with Mid-'28 Tudor listing.

    Pictures to go with Mid-'28 Tudor listing.
  5. ModAfan

    Mid-'28 Tudor for sale

    For Sale: Mid-1928 Tudor in excellent condition, except that the original engine has a Babbitt problem. The engine starts and idles but knocks on acceleration. There are flakes of Babbitt in the bottom of the oil pan. The brakes screech a bit at times. The car was restored in about 1985. Between...
  6. ModAfan

    Odd knock

    My ’28 Tudor developed a knock of some kind recently. There is no knock on startup or until I am into a ride for five or ten minutes. The knock starts slowly, then it gets worse as the engine gets hotter. The knock happens only on acceleration. If I retard the spark (until the lever is about...
  7. ModAfan

    engine question

    The serial number on my Model A’s engine indicates that it passed final testing on May 22, 1928. The date stamped on the firewall is June 20, 1928. Was it normal for an engine to take 30 days to make its way to the assembly line?
  8. ModAfan

    door handle removal

    In Vol. 1 of Les Andrews handbooks he says when removing an outside door handle on a closed car to turn the handle ¼ turn to the left after removing the two screws. I can’t get the handle to turn to the left at all, it won’t budge. Any ideas?
  9. ModAfan

    knocking on acceleration

    My ’28 Tudor starts easily, but stalls if I give it any gas until it warms up, and it has started to knock during acceleration. There is no sign of knocking at idle or at full throttle. The knocking starts about five minutes after I start driving. If I retard the spark lever to about 3/8” from...
  10. ModAfan

    apparition

    When I walked by my ’28 Tudor in the garage yesterday I did a double take on the apparition on the front floor. It was caused by a shaft of sunlight coming into the garage, through the back window of the Tudor, between the front seats and onto the gear shift lever.
  11. ModAfan

    Tilly question

    Anyone know what the difference is between a Tillotson X and a Tillotson Xf carburetor?
  12. ModAfan

    Antifreeze questions

    I sent the questions below to Prestone recently. The company’s reply follows. Any thoughts or comments? My Questions to Prestone: I have a 1928 Ford Model A. It has no coolant reservoir, no heater and its cooling system is not pressurized. When it overheats, it just blows its top. (My car...
  13. ModAfan

    Heathkit Analyzer question

    I bought the CO-1015 Heathkit Ignition Analyzer in the photo on eBay last week. The seller said it was built by his grandfather in 1976 and used very little. It looks new, calibrates perfectly and came with both the Assembly Manual and the Operation Handbook. Can anyone who uses one of these...
  14. ModAfan

    Marvel Parts

    Last fall I bought a used Marvel Schebler carburetor to rebuild as a winter project. After removing all of the parts, I noticed that there was a crack in the bottom of the float chamber, which was corroded in that spot. The area around the crack was very thin, and by the time I reached metal...
  15. ModAfan

    New Knock

    My ’28 Tudor has developed an engine knock. The engine idles very quietly, and the knock is not present when the engine is at cruise speeds (30 to 45 M.P.H.). It knocks only while accelerating. Any ideas? Thanks
  16. ModAfan

    ID wrench

    Anyone know if the wrench in the photo is for a Model A? It has "Ford" and the letter "H" on it. It looks old enough to be. Thanks
  17. ModAfan

    compression question

    I did a compression test yesterday. Cylinders one through four measured 60, 60, 45, 65 psi, respectively. When I inspected the sparkplugs, I found that plug #3 (cylinder measured 45 psi) had soot on one side of the ceramic cone. The other plugs had no soot on the ceramic. Anyone know if there...
  18. ModAfan

    One-ton orphan

    I was in an auto repair shop today and I noticed the (’25-’26?) one-ton Model T in a back room. The owner told me that a very good commercial customer had brought the truck to him almost two years ago and asked him to put in good condition. The shop owner did a lot of work on the truck, trying...
  19. ModAfan

    Model T in Winter

    I gave an old friend of mine a ride in my Model A (1928 Tudor) today. He remembered that he had some pictures of his grandfather, who was a letter carrier in northern Michigan in the '20s and '30s, driving his Model T delivery van. I have attached the pictures here because I thought you all...
  20. ModAfan

    Out of the blue...

    I received and out-of-the-blue phone call the other day from the manager of the dealership from which I had purchased my 1928 Tudor in July. He said the previous owner of the car had dropped off some awards that the car had won and asked the dealer to see if I wanted them. I did. What I found...
Back
Top