Search results

Ive got a 41 pickup that I am working on and the front crossmember is busted. I was lucky enough to pick up a new crossmember at a local swap meet this past weekend but noticed a difference in the motor mount area of the crossmember. The 41 truck motor mount area is taller than the 35-40...

Could some one post a picture of what the right spring looks like and what the left spring looks like. I have the springs and they look exactly the same, not sure if there is a suttel difference that i am not seeing. Thanks

I have what I thought was a Model A front outer hub race but after looking at the numbers its actually a 09194 part number which is for a Model T. The only difference im seeing is the radius on the bottom edge of the bearing race. The Model T has a bigger radius compared to the Model A sharp...

I am looking for someone in or near NC who has experience with rebuilding a Model A banjo rear end. Thanks

I am working on a project and currently in the process of assembling my rear end. I currently have a very good condition stamped steel rear brake drum and hub assembled together that is measuring .141 thickness. I also was able to find another complete drake drum and hub from a local Model A'er...

I am looking for a good usable rear hub and drum for a Model A. I have one good one measuring at .14 thick on the drum. Thanks

I have a 17 inch fatman steering wheel that I had planned on running but after installing my seat it wont work so I am needing a 15 inch steering wheel. Anyone have suggestions on where to purchase one at? Thanks

I was looking in the greenbook and noticed there is suppose to be a fiber washer that goes on the outside of the drum before the keyed washer and castle nut? I do not have this, is this something I can make or is it something i really need to worry about putting on?

How much gap is there suppose to be between the hood and cowl and the hood and grill? I mocked mine up and it seems to be quite a big gap on both sides.

I like this color alot but can not figure out what its called, if anyone has any infor please let me know.

I have a few parts Im looking to get rid of. 1930-31 stainless dropped headlight bar 1929 ford coupe/ roadster hood. The hood is in pretty good shape. it was on a driver when i bought it but decided to go a different route. 1929 ford coupe/ roadster hood. The hood is in pretty good...

I am needing the 2 round and flat pieces that have a triangle hole in them, that goes in the brake shoe of a 1939 ford. I am needing 2 of these. Thanks Billy

I was wondering who makes or offers the best reproduction rear fenders for a 1929 ford coupe? Thanks Billy

I am needing to get a set of repro splash aprons, what vendor sales the best ones? Thanks

I am needing an original hood orjust the hood top and not the sides. I have an original hood but the hinge in the middle of the hood top is broke. Please let me know if anyone has one. Thanks Billy

I bought a brand new inner distibutor cap for my 59ab engine. When I went to install it on to the distbutor the inside lower edge of the cap ( the part that sits into the distibutor) chipped off. I noticed that the original cap was the same way and was wondering if this is common and will it...

I have a 1939 or 1940 column drop and Im missing the lock leaver and parts. I have a pictured attached to the forum with what I have. If anyone hase parts for this please let me know. Thanks Billy

I have an open drive 3:54 ring gear and pinion that I want to put in a 39 ford banjo rear. I have never done any type of rear end work and never switched the R&P before. I have read a few tech write ups on here but just dont feel confortable doing it. So I called a shop who does rear end work...

I have a 59ab flatty that I am needing a rotor cap for. The type that was on the motor had a rotor cap with 2 outlets coming out of the top of the cap. It also has an inner cap also. I would like to run a crap type cap on the engine, am I able to? Or do I need to stay with the same type rotor...

I am needing a std flathead piston for my 59ab if anyone hase one. Also some rings for the piston. Thanks