Search results

I had a 37 pickup a while back but it was a Hot Rod. I was curious if the factory bed was steel over a wood subframe and painted the body color or black?

One of my headlights on my 37 pickup is starting to flicker. I've checked the switch and wire and see no issues. Have no idea how old they are so thought I would buy a new pair. With the info I see on the light I can't seem to find the same number doing a search. Need a little help guys. Thanks.

I need to replace the lacing on the radiator shell and up by the windshield. Is it the same lacing for both area's with the double beads? Should I buy the rivet or screw kit? The old lacing has rivets.

The old drawer cabinet in the pic was my grandfathers, then my fathers, then my older brothers, and now mine and we have all dabbled in cars through out the years. This old cabinet comes in handy as all the drawers are full of old nuts, bolts, screw, etc. I call it my junk box. Yesterday I...

Im going to paint my running boards black on my 37 pickup. While they are off I'm going to replace the welting. I have welting at the running board and front fender but is there welting at the running board and rear fender? Can someone give me a link to the proper welting that I need to...

I'm going to have the rubber seal and glass replaced on my 37 before winter hits and I want to get the Winshield working to get some fresh air in. Looking through the windshield I can see that the regulator seems to be there but the handle on the dash just spins around. My question is, do I need...

Can someone give me the length of the bed and where are the measurements taken from. Not really sure if my bed is a 37 or not. Thanks.

Take a look at the piccs. My headlight on the passengers side is pointing down much more than the drivers side. I took the light out on the passengers side and did not see any adjustments inside. The only thing I can see is maybe shimming g up under the headlight post that attacheS to the...

Thanks to the bad roads here in souther IN my pickup is now pulling a little to the right. Can I loosen both tie Rod ends and turn the tie Rod to make a small adjustment to get it back on track? Not sure if this is how it's done.

I work in Automotive in the Quality Dept. where I am a CMM programmer. I deal with a lot of gages and today I opened up a wooden crate that had a Ford product gage and I saw these laying on top of the gage. Never seen these before. Anyone have a clue just what they are???

Is there a rod that goes through this hinge or do the ends just fit into the front and rear brackets?

I just pulled the wiper motors out of my pickup. Can someone tell me if these are the original 6v motors or aftermarket? My pickup is running a 12v system and one wiper worked for 5 min when I got the pickup. Can the 6v motors run on 12v? Thanks.

I'm turning to the experts. The glass in both my doors are loose. I'd like to buy a kit that I can install with new felt and seals if that's what it's called. Found this kit at MAC's but not sure if this is what I need. Can't seem to find anything on line on just how to install this kit...

Need a little help guys. The pics show my current 17" steering wheel in my 37 Ford pickup. I don't think it is original. I was going to get a new leather steering wheel cover to match the new interior but the seat is now a little higher and a little closer to the steering wheel. I'd like to put...

Ok guys....I'm seeking help from the experts. I am trying to make one good door latch from two that I have. The two square holes in my old door latch were rounded off. The two square holes in the other latch that I have are really good. Here is my problem, the square shaft from the door...

I'm looking for a good Drivers side door latch for my pickup. If the two square holes are rounded off I don't need it. I already have one of those.

What is the difference between the 6, 7, and 8 loop door check strap. The pic makes the rubber look so stiff. I can't see how it's going to flex in half when the door shuts.

Bought these repair kits its for my 37 Ford pickup. How do you remove the old pin and how do you install the new pin. I guess drill out the old pin but how do you smash the new pin once in place? Use a pair of pliers or do I need a special tool?

Guys, I need to replace the gasket on my windshield. The window crank no longer works and I see MAC's sells a 3 piece gasket set. I would assume this is for a working crank out window. Is there a replacement gasket that just seals the windshield in or if I take it to a glass shop they will...

Guys, Can't seem to locate any of these aftermarket or NOS. MAC's has no listing, Drake is out of stock, and nothing on eBay. Any idea's?