*37 Pickup Loose Door Glass*

zippi said:
I'm turning to the experts. The glass in both my doors are loose. I'd like to buy a kit that I can install with new felt and seals if that's what it's called. Found this kit at MAC's but not sure if this is what I need. Can't seem to find anything on line on just how to install this kit either. Need a little help.

http://www.macsautoparts.com/early_...trip-goes-on-garnish-mouldings-and-doors.html
Click to expand...

That's the kit. I would strongly suggest you buy it from someone other than Mac's. They have a very poor reputation.

In my opinion, the installation is a pain in the butt. The cars of this period are much easier.
Regardless, the installation is a straight forward process.
Once you have the pieces in hand, I'd advise you start removing the old pieces and note how they were installed.
 
Kube said:
That's the kit. I would strongly suggest you buy it from someone other than Mac's. They have a very poor reputation.

In my opinion, the installation is a pain in the butt. The cars of this period are much easier.
Regardless, the installation is a straight forward process.
Once you have the pieces in hand, I'd advise you start removing the old pieces and note how they were installed.
Click to expand...

Thanks for the help.
 
I bought a kit from Bob Drake for my 39 pu after searching threads here, no complaints. Buy extra screws and clips for convenience.
 
The part description mentions garnish molding. Your 37 does not have a removable garnish molding does it? That would make the part for 35 at the newest since that's the last year I know of that the garnish molding was a removable piece. Based on my limited knowledge and the fact I have 35 and 36 cabs/doors here.
I also would buy from Mac's as a last resort. I usually look on ebay too. Many suppliers sell their stuff cheaper and with free shipping on ebay, or you can find a set someone ordered and didn't use.
 
You must log in or register to reply here.
Back
Top