Search results

A guy I know is searching for a 1952-1953 Fordomatic Torque Converter. Does anyone have one or know where to get one. Thanks Ray Balukas

Looking for 2 - 16x5" wide 5 wheels

I have an 8BA stock rebuilt { Walt Dupont} engine. It has run great, and still runs great except for 1 issue which just started. Taking off in 1st and 2nd gear , and winding her up, high revs the engine cuts out . If I dont wind it up it runs fine, no issues in 3rd gear. I have changed the...

I'm looking to find out the width of 1938 Brake Drums when new. I know they'12". Are they 12" .060 new? Any help would be great. Thanks Ray

The 36 drum doesn't have the metal ring inside, the 37 drum does. Just wondering if this was the way the 36 drum was, and if it was a change for the 37-39. I had the 36 drums turned. the 37 drums was to thin to use. Thanks Ray

Well I figured out how to download photos, so here's my 37 panel resurrection. I purchased this October 2010. It took me until spring of 2016 to complete. Countless hours repairing dents, rust, cracks in fenders. I have also added pictures to an album.

Purchased a complete front spring from Eaton Detroit Spring for my 37 Panel. I installed it this past Saturday, it fit perfect. Hats off to them . Ray

I have 2 sets of rear Brake drums , were the bearing rests on one set is a flat, round pc of metal. On the other set the bearing is just setting on the inside , no metal ring. The 2 sets are different. Any info would be of great help. Thanks Ray

Doe's anyone know were I can purchase an 8ba distributor vacumn line ? Mine wont tighten down at the distributor. the fitting tightens but the line pulls out of the fitting. Stock 8BA . Thanks ray

The Dingman Collection of High Quality Fords, Neon Signs, Flathead Parts, Engines, Will be held on June 22,23,24. Hampton N.H. RM Auctions is handling this. Ray

I had 4 wide 5 wheels Straightened by Rim-True in Hollis Maine. I couldn't be more Happy. No more wobble or shake. Running 600x16 I added 4 ounces of Counteract Balancing Beads per tire No more damage from wheel weights flying off. Give Him a try you wont be sorry.Call Jerry 1-866-Rim True .

Hi, I have several wide 5 wheels, The issue I'm having is finding wheels that are true with no left to right wobble. I was wondering if anyone has a way to true them. I realize that most had a rough life years ago. I had them balanced with wheel weights which helped, but threw 2 weights going...

Hi to all, I have removed the Starter and bolts on my 8BA clutch inspection plate, but can't seem to get it to slide out. Help please, don't want to mess anything up. Thanks Ray

I have a 37 generator. I'm looking for the bolt size that holds the band which goes over the generator.It bolts to the generator bracket. Thanks Ray

I have a grille bug screen for my 37 Panel How were these attached to the grille? I would like to be able to install and remove as needed without scratching the paint. Thanks Happy Thanksgiving Ray

What are the thoughts on using seam sealer on the door skins? I realize this was not done in 37. The previous owner soldered the door skins. My panel is going to be a driver, but mostly original.

I was wondering if anyone has purchased the aftermarket door latches available from various venders. How is the fit? also working functions. 37 Ford 1/2 ton Panel. Thanks Ray

I have installed an after market heater in my Panel. I want to install a shutoff in the heater hose. Is the heater hose outlet on the water pump the circulating outlet, and the fitting on the block the return? Thanks Ray

I have an 8BA truck air cleaner. My question is , is their a gasket where it tightens to the Carb? also is there one inside were the 2 pieces meet? Thanks Ray

Does anyone have a Lower radiator hose part No for 37 Panel with 8BA 37 radiator. They are about 6 " long with a slight curve to them. Any help would be great. Also I might as well ask about the upper hoses for the same. Thanks Ray