Search results

Attention Bubba Ign P M ed you Can not reach you by phone??

Have a fresh 255 merc built. Eab cast heads at 7.5 :1 comp. L-100 cam fenten cast iron headers and a Eddie-meyer duel hy-rise intake. I have four 94 style model 59 carbs. Hope to build two out of them.Will they be workable or should I bit the bullit and go with new 97s?

This is a shot of my 46 ford 1/2 ton that I just sold. My next project is a 53 Mercury 1/2 ton. It will be restored nearly stock. I say nearly because it will be driven very often and on the high way, so I am going with an S-10 five speed trans to keep my flat head running well for many miles. I...

Hey I know there is not a lot of guys out there playing with 42-47 ford trucks, but I was not able to find a usable stock gas tank and was forced to build my Owen. I placed it under the box behind the rear Axel and the filler pipe comes up through the floor of the box. Has anyone put a tank in...

My wife and I recently moved to a new location to be closer to our grand kids.But the new home we bought did not have a shop or room for the 40 year collection of Model A cars and truck loads of parts I had amassed over the years. Even though we knew months in advance we were going to move I had...

Had my 46 ford tank cleaned and pressure tested for leaks at the rad shop and all was good. When I got home I used a white colored tank sealer just to be sure I would not have to remove the tank down the road when the driving was just getting fun.Well no leaks but now the lines tank and new...

:cool:Bought a new project from a friend awhile back and just going to get started on a total restore. It`s a 53 Mercury 1/2 ton . Have not had a flathead since the 70s and looking forward to getting back in the saddle. I also have a 46 ford 1/2 ton , it was in very rough shape so a restore was...

Ok if I can just get a little feed back on this. Just going to install new 8ba flathead in my 53 merc Pick-up. Eab heads ,4" crank ,max 1 cam .030 over bore. Now is the Eddie Meyer two deuce intake a good chose . The trans is a T-5 with 392 rear gears.And what carbs will work best on the street...

Have 9 counter weighted Model A crank shafts for $100 each. They need to be checked for straight and ground to the size you will need . Prefer pick up on these the freight will be a killer.Have a ton of stuff mostly mechanical parts . Too much to list so Pm with needs I will try to help if I...

Hi am new to the site but am not new to restoring Model A`s as I did them professionally for many years. Most where not driven often by there owners. But my own are updated with hydraulic brakes, 354 gears and balanced A or B engines. Not stock but very road worthy and drivable on a daily basis...

Hi am new to the site but am not new to restoring Model A`s as I did them professionally for many years. Most where not driven often by there owners. But my own are updated with hydraulic brakes, 354 gears and balanced A or B engines. Not stock but very road worthy and drivable on a daily basis...