Recent content by amedic

  1. A

    1928-29 Closed Cab Pickup

    Just finished up a 29 cab and will be starting another soon. contact me direct and I can send you some pic's. I have done several of these. They are one of the easier body's to do
  2. A

    Generator

    Will your generator "motor" when you hook it up to a battery? A gen. that is working properly will run slowly, just like a dc motor when you hook it up to a battery. It should be smooth... and should draw around 6-7 amps. If it will not do this then will need to go back and check things again...
  3. A

    31 tudor, project

    Do you still have this project? .... might be interested. I live in Wichita
  4. A

    What to pay for a AA??

    Leo, I would check to see what gear ratio the rear end is. Most of the 30's were 6.67 to 1. This is considered undesirable from a driving stand point. You will get about 35mph out of it but that's about it. You really want a 5.14 to 1. This will give you about 45mph with a good engine. With a...
  5. A

    Steel brake drum 'turning'

    Will, I have turned 100's of steel drums on the brake lathe without a problem. The problems really arise when the carbide insert on the cutting tool becomes chipped or dull. You must use a rubber silencer also. Any experienced brake mechanic should be able to help you
  6. A

    engine redo

    If your running a babbit engine ... be careful .... you'll blow the bottom end right out of it by pumping up the top end too much!
  7. A

    OHV head...model A/B

    contact Dan Price .... dan4banger.com He has one listed on ebay right now
  8. A

    Wanted: Model a engines

    HI, I am looking for model a engines located in southern ks, or northern ok. let me know what you have and $$$$$ thanks
  9. A

    Lean to the left

    Have you checked your shackles? I have had a few cars in the shop here that were leaners. Many times a tight shackle that will not take grease was the problem.
  10. A

    What is the purpose and function of babbit ?

    Go to antiquenginerebuilding.com He does an excellent job with inserts.
  11. A

    F150 ****** with overdrive

    You want the T170FT CODE RTS. ...You will not disappointed! No modifications required to the cross member or brakes!!! The best choice by far!!!
  12. A

    Model A Ford K.R. Wilson Shock Tester

    put it on ebay and see what happens ....
  13. A

    Odd Water pump with cover?

    I had one of these on my '31 fordor. It started to leak so it's off now. I haven't taken it apart yet to see what it's made of. Stay tuned ...
  14. A

    Mac's tire prices can't be beat - yes they can !

    Face it guys.... it doesn't matter where you buy .... they are all too expensive!!
  15. A

    diff carrier problem

    I have several diff carriers in stock if you need one. Just direct message amedic.
See more
Back
Top