Media added by Kohnke Rebabbitting

Navigation

Browse albums

Trending media

Dave's Model A from Lincoln, Ne , Part 2 240 This tool was made to put in seals, but it works real well on pilot bearings also.

Dave's Model A from Lincoln, Ne , Part 2 240 This tool was made to put in seals, but it works real well on pilot bearings also.

  • Reaction score 0
  • Comments 0
Dave's Model A from Lincoln, Ne , Part 2 247 Make sure that there is absolutely no oil of any kind on the flywheel, and pressure plate, it dosn't tak

Dave's Model A from Lincoln, Ne , Part 2 247 Make sure that there is absolutely no oil of any kind on the flywheel, and pressure plate, it dosn't tak

  • Reaction score 0
  • Comments 0
Dave's Model A from Lincoln, Ne , Part 2 243

Dave's Model A from Lincoln, Ne , Part 2 243

  • Reaction score 0
  • Comments 0
Dave's Model A from Lincoln, Ne , Part 2 245

Dave's Model A from Lincoln, Ne , Part 2 245

  • Reaction score 0
  • Comments 0
Dave's Model A from Lincoln, Ne , Part 2 247

Dave's Model A from Lincoln, Ne , Part 2 247

  • Reaction score 0
  • Comments 0
Dave's Model A from Lincoln, Ne , Part 2 249

Dave's Model A from Lincoln, Ne , Part 2 249

  • Reaction score 0
  • Comments 0
Dave's Model A from Lincoln, Ne , Part 2 250

Dave's Model A from Lincoln, Ne , Part 2 250

  • Reaction score 0
  • Comments 0
Dave's Model A from Lincoln, Ne , Part 2 254

Dave's Model A from Lincoln, Ne , Part 2 254

  • Reaction score 0
  • Comments 0
Dave's Model A from Lincoln, Ne , Part 2 256

Dave's Model A from Lincoln, Ne , Part 2 256

  • Reaction score 0
  • Comments 0
Dave's Model A from Lincoln, Ne , Part 2 258

Dave's Model A from Lincoln, Ne , Part 2 258

  • Reaction score 0
  • Comments 0
Dave's Model A from Lincoln, Ne , Part 2 259

Dave's Model A from Lincoln, Ne , Part 2 259

  • Reaction score 0
  • Comments 0
Dave's Model A from Lincoln, Ne , Part 2 261

Dave's Model A from Lincoln, Ne , Part 2 261

  • Reaction score 0
  • Comments 0
Dave's Model A from Lincoln, Ne , Part 2 262 Oiling bolts again.

Dave's Model A from Lincoln, Ne , Part 2 262 Oiling bolts again.

  • Reaction score 0
  • Comments 0
Dave's Model A from Lincoln, Ne , Part 2 263 Pressure plate under tension, and ready to put in the pilot shaft tool.

Dave's Model A from Lincoln, Ne , Part 2 263 Pressure plate under tension, and ready to put in the pilot shaft tool.

  • Reaction score 0
  • Comments 0
Dave's Model A from Lincoln, Ne , Part 2 264 Pilot shaft is set.

Dave's Model A from Lincoln, Ne , Part 2 264 Pilot shaft is set.

  • Reaction score 0
  • Comments 0
Dave's Model A from Lincoln, Ne , Part 2 265 Showing how we mark the Pressure Plate, and Flywheel so they stay mated.

Dave's Model A from Lincoln, Ne , Part 2 265 Showing how we mark the Pressure Plate, and Flywheel so they stay mated.

  • Reaction score 0
  • Comments 0
Dave's Model A from Lincoln, Ne , Part 2 269 Bolts tight, and pressure off tool.

Dave's Model A from Lincoln, Ne , Part 2 269 Bolts tight, and pressure off tool.

  • Reaction score 0
  • Comments 0
Dave's Model A from Lincoln, Ne , Part 2 269

Dave's Model A from Lincoln, Ne , Part 2 269

  • Reaction score 0
  • Comments 0
Dave's Model A from Lincoln, Ne , Part 2 271

Dave's Model A from Lincoln, Ne , Part 2 271

  • Reaction score 0
  • Comments 0
Dave's Model A from Lincoln, Ne , Part 2 273 30 Foot pounds on the pressure plate bolts.

Dave's Model A from Lincoln, Ne , Part 2 273 30 Foot pounds on the pressure plate bolts.

  • Reaction score 0
  • Comments 0
Dave's Model A from Lincoln, Ne , Part 2 280

Dave's Model A from Lincoln, Ne , Part 2 280

  • Reaction score 0
  • Comments 0
Dave's Model A from Lincoln, Ne , Part 2 283

Dave's Model A from Lincoln, Ne , Part 2 283

  • Reaction score 0
  • Comments 0
Toms Model A 001

Toms Model A 001

  • Reaction score 0
  • Comments 0
Toms Model A 002

Toms Model A 002

  • Reaction score 0
  • Comments 0
Back
Top