I just intaller flashers in Model T. Didn't want stalk on column so I made up from scratch and put a buzzer so I can hear it so as not to leave it on. I got a 550 3 terminal flasher That has X,L,and P. X is 12v in, L is load to lights and P is pilot light. I get no power to P. I was using old flasher and thought it was bad so I bought a new one. It has no power to P either. I put 1 wire of buzzer to P and other to ground. I put a light in place of the buzzer, still no workie.I fixed one up awhile back and it worked good but don't remember how I wired it but I would think I did it this way as this is logical. Maybe not or maybe I don't have exactly same flasher even though it was 3 prong also with X,L,and P.
Any Ideas what to do to get it to work short of getting another buzzer and connecting parallel with lights, 1 for right and 1 left
Any Ideas what to do to get it to work short of getting another buzzer and connecting parallel with lights, 1 for right and 1 left