Tillotson carburetor ?

buzz

Member
I know of the tillotson X but there a tillotson carb that looks simular to the zenith carb any idea were I can get gasket sets or info on them plus any idea if these are better then a zenith or the X carb
Plus will the zenith gasket sets interchange
 
Buss,

The carb you are talking about is a F1B, the only thing, I believe, that is available is the gasket set; Smith and Jones Antique Auto Parts, 1-800-422-1928.
The carb runs good if you clean all the passages; as a example, there is a seal on the mounting bolt that holds the two halves together, the reason is, the gas is around this bolt and there are two small passage-ways for gas in the lower housing above the bolt head. The F1B is also made of a ferious metal and sometimes you have to install heli-coils when the mounting bolts to intake manifold strip out.
If you plan on rebuilding be sure you have all the jets, if not, look for a spare for parts.

I can send you a article that shows all the passage-ways.

Frankly I think you would be better with a original Zenith or Holley as all parts are available, they re cast iron and most are very re-buildable.

Send me a PM if you want the F1B article.

Ron
 
When I acquired my 1930 Coupe it had a Tillotson F1-B, and when I acquired my 1929 Phaeton it also had one. Both were trouble free for about 55 years on the Coupe and about 40+ years on the Phaeton, always gave 23 -25 mpg. Switched to Zenith on both cars only because of authenticity in showing the cars, no other reason. I have the carbs and sometimes think about putting them back on.
 
Back
Top