Stretch’s 36’ 3W Coupe build

ssffnomad

ssffnomad

Well-known member
Stretch’s 36’ 3W Coupe build

Hello.
On a 35/36’ Coupe , the bumper brackets bolt on the corner of the frame.
Then set body down on frame .
A 3/8” - 24 body mount bolt goes up through this bracket.
Approx how thick is the pad that goes between body and bracket ?
T/Y
 
Re: Stretch’s 36’ 3W Coupe build

IMG_3414.jpg
 
Re: Stretch’s 36’ 3W Coupe build

There are some photos below of the corner brackets. Between the body and the corner brackets, at the rear, on the 35, are square washers with a hole for the bumper arm bolt. The amount of these washers depends upon the distance between the brackets and the body. Usually a couple.
 

Attachments

  • 35 ford rear bumper frame supports various alterations (2).JPG
    35 ford rear bumper frame supports various alterations (2).JPG
    60.1 KB · Views: 798
Re: Stretch’s 36’ 3W Coupe build

Terry, thank you.
I just found a diagram that shows 2 1/2” pad for rear mount .
Stretch
 
Re: Stretch’s 36’ 3W Coupe build

Could you post the part number & vendor for those pads ? Can't read the diagrams when I enlarge the pic.
Thanks,
Bob
 
Re: Stretch’s 36’ 3W Coupe build

Unfortunately today I posted here in our “Parts Wanted” section.
The metal channel that goes in Roof insert area.
Weird that is missing on our 3W coupe.
 
Last edited:
Re: Stretch’s 36’ 3W Coupe build

Good Morning.
So are looking way ahead, and trying to source interior parts.
Can only find one company that can provide a
36’ 3W pre sewn headliner.
“Acme Auto Headlining Co.”
Long Beach, CA
Have any of you guys dealt with them ?
Thanks
Stretch
 
Re: Stretch’s 36’ 3W Coupe build

ssffnomad said:
Good Morning.
So are looking way ahead, and trying to source interior parts.
Can only find one company that can provide a
36’ 3W pre sewn headliner.
“Acme Auto Headlining Co.”
Long Beach, CA
Have any of you guys dealt with them ?
Thanks
Stretch
Click to expand...

Acme is a very old company and have probably been around since the 50's. Never heard any negatives on them. Right now they are probably the only game in the hobby.
 
Re: Stretch’s 36’ 3W Coupe build

IMG_1666.jpg

IMG_1668.jpgHello. Headliner questions .
I have two Bowes , is that correct ?
There are two screws for Bowes , what’s the hole above them for ?
Thanks Guys.
Stretch
 
Re: Stretch’s 36’ 3W Coupe build

35/36’ 3 Window Coupe headliner Bowes.
We received a new headliner.
It is made to accept 3 Bowes .
We currently have 2 Bowes.
Measured they with a cloth tape .
They are 63” & 67 1/2” long.
Would any of you FB members have Bowes to measure please ?
 
Re: Stretch’s 36’ 3W Coupe build

No help on measurement; but here is a picture of the layout.

A while back @Heard posted about making his bows out of 5/16 or 3/8 steel brake line tube with mount tabs welded on the end.
 

Attachments

  • 36 3W headliner bows 3.jpg
    36 3W headliner bows 3.jpg
    60.1 KB · Views: 58
You must log in or register to reply here.
Back
Top