TomT/Williamsburg
Well-known member
I'm off to GG Charlotte tomorrow and although the weather looks to be "not wet" I do believe it will be a bit nippy. So, I made up some side curtains that will keep out most of the cold air that might come in. Coupled with my heater we should be toasty enough.
There's a magnetic strip on the front verticle piece behind the door glued to the lexan and the black edges are 65-66 Mustang edges covering from where the rear body panels meet on that vehicle. They provide a "clean edge" to then "push in" the curtains and stay stationary - a press fit sort-to-speak. The cabin will not be anywhere near air tight so I do not expect too much air to force the curtains to push out. Regardless, we'll see how things go ....
There's a magnetic strip on the front verticle piece behind the door glued to the lexan and the black edges are 65-66 Mustang edges covering from where the rear body panels meet on that vehicle. They provide a "clean edge" to then "push in" the curtains and stay stationary - a press fit sort-to-speak. The cabin will not be anywhere near air tight so I do not expect too much air to force the curtains to push out. Regardless, we'll see how things go ....