Preventing electrochemical corrosion alloy heads

E

ethov8

Junior Member
Any ideas on preventing this type of corrosion or slowing it down. Mine are Eddelbrock heads but I guess the make is immaterial. The engine has not been run with coolant in it yet.
Any ideas appreciated.
 
ethov8 said:
Any ideas on preventing this type of corrosion or slowing it down. Mine are Eddelbrock heads but I guess the make is immaterial. The engine has not been run with coolant in it yet.
Any ideas appreciated.
Click to expand...

Yeah, use modern anti-freeze / coolant.
Nearly all modern engines use a lot of aluminum in them.
Corrosion of these parts is not much of a worry these days.
Even my Aston requires zero additives other than modern anti-freeze / coolant.
 
Depending on the climate you are in, No-Rosion and Reverse osmosis water is not only an effective coolant, but it eliminates corrosion. When you install the heads, coat the studs or bolt shanks with graphite petrolatum anti-seize, and you will be able to get the off again in the future.
 
Interesting subject. I just pulled the water pumps. They were rebuilt by the guy in Florida and installed eight months ago. Used Ethylene Glycol (green stuff). 50/50. We have pretty hard water. Should a guy use premixed modern anti freeze.

EFtCIxNb.jpg
 
Me, personally, I use 50% antifreeze mix, sacrificial anodes, anti seize on all head studs, numerous grounding straps, including one of those rubber ones that drags on the ground. Like the Irishman who wore two condoms; to be sure, to be sure!
 
tubman said:
I have installed a sacrificial anode, if only for mental health reasons.
Click to expand...
Hi
Are you using zinc or a zinc solution as an anode? If it is zinc how do you get it into contact with the aluminium and in the electrolyte as well?
Cheers Marcus
 
Brian said:
Me, personally, I use 50% antifreeze mix, sacrificial anodes, anti seize on all head studs, numerous grounding straps, including one of those rubber ones that drags on the ground. Like the Irishman who wore two condoms; to be sure, to be sure!
Click to expand...
Hi Brian
Tell me more about these grounding straps you use. Do you ground the engine direct or what? What material are the straps etc.
Cheers Marcus
 
ethov8 said:
Hi Brian
Tell me more about these grounding straps you use. Do you ground the engine direct or what? What material are the straps etc.
Cheers Marcus
Click to expand...
These are rubber anti-static straps that attach to the frame of the vehicle and drag on the ground.
They are meant to eliminate the build up of static electricity in the body of the car and have nothing to do with eliminating engine corrosion.
Just Google 'static strap' for availability.
 
Reverse osmosis water may not be your best choice. Water that has been striped of all it's elements will want them back and will go after the softest metal first. You want water with a neutral PH of 7. Any thing less is acidic, not good for aluminum heads. Anodes in the radiator will be a big help, zinc or magnesium is best along with the proper antifreeze. I used to work with DI ultra pure water and was amazed at how aggressive it was and how it rusted the best tools we had. Just my thoughts. Frank
 
franksford said:
Reverse osmosis water may not be your best choice. Water that has been striped of all it's elements will want them back and will go after the softest metal first. You want water with a neutral PH of 7. Any thing less is acidic, not good for aluminum heads. Anodes in the radiator will be a big help, zinc or magnesium is best along with the proper antifreeze. I used to work with DI ultra pure water and was amazed at how aggressive it was and how it rusted the best tools we had. Just my thoughts. Frank
Click to expand...

What gets you the neutral ph? Distilled?
 
The zinc anodes I make. Get some 1/2 dia zinc rod [I buy it from local marine shop], cut to suitable lengths. Cut a 1/4 pipe thread on one end. Get a brass 3/8 pipe plug, it'll have a recess inside it. Tap that out 1/4 pipe thread, screw in the zinc. Now you've got something that looks very similar to a temp gauge sender...Screw into the cylinder head. Job done.
 
ethov8 said:
Hi
Are you using zinc or a zinc solution as an anode? If it is zinc how do you get it into contact with the aluminium and in the electrolyte as well?
Cheers Marcus
Click to expand...

I'd tell you what I did, but the ones that "alchemy" posted are much better and cheaper, so I'm getting a couple of them and throwing mine away.:o
 
You must log in or register to reply here.
Back
Top