pinion angle help

[40cpe]

Yes, alemite = grease fitting

 

[ventport]

Zerk fittings replaced Alemite fittings on almost all makes by 1934. Alemite is old school for grease fitting.

 

[santino2010]

Ok got it I'll see if I can get a flat spot there but It doesn't look flat it sort of looks round

 

[santino2010]

It doesn't look like a flat area on where the grease fitting is

 

[fordor41]

I just checked angles on our '60. I removed the D.S. and found a piece of pipe that just fit the U-joint recess of the pinion yoke, Turned the yoke to the vertical position and that gave me a true vertical surface to place my angle finder