New to Model A

I finally have Pictures of my Sedan 1930 Briggs Model A
This right ? LOL

OK, many have asked for pics that they might be able to help me with this stuck engine.
I am still digging into this machine, and I find she is very much original...wood?
Bad seat cover over originals. Look for the wood behind the rear seat. and around window. You guys know better than I, so let me know if what I am seeing is true.
 

Attachments

  • thumbnail (1).jpg
    thumbnail (1).jpg
    38.6 KB · Views: 125
  • right side engine.jpg
    right side engine.jpg
    49.4 KB · Views: 124
  • port side rear quarter.jpg
    port side rear quarter.jpg
    44.4 KB · Views: 112
  • original back seat wood.jpg
    original back seat wood.jpg
    35.7 KB · Views: 119
  • The A.jpg
    The A.jpg
    36.6 KB · Views: 113
  • under dash.jpg
    under dash.jpg
    38.1 KB · Views: 117
I can see them. The picture of the motor and motor/head paint may indicate a head gasket leak in the cylinder 2-3 area. If yes and water made it to valves/pistons and then sat, they may be rusted to the block. Check motor oil for water.


Looks like there is/mav have been an issue at the Water pump, Bad Water pump Gasket, or packing Nut leak, or upper hose neck /head gasket leak.


If unable to get motor freed up, most likely the head will have to be pulled.
 
Looks like a standard Fordoor that has been uh.....'upgraded'. I can't tell about the wood but if you poke at it with an awl and it doesn't go in very far then consider the wood good. However, the whole body is made of wood, roof, top, doors sill etc. Do the doors sag at all? Do they close nice and tight? You have a "fairly rare" car as many Fordoors got turned into Townsedans so there are not many stock Fordoors left.


But the Body looks nice and straight, dent free and solid. So, outside of the engine I think you have a winner. Don't forget to check over the brakes and front suspension.


Mike
 
The car rolls free when out of gear, yes.
Now I have removed three bolts holding start r to bell.
Starter does not want to come lose.
 
Seller said engine was coated for storage. It's like a bad black paint that is peeling off. No idea yet how to remove it. It's covering everything.
 
If the starter is unbolted and it won't come off/out, I am thinking that you have something really tight /jammed onto the starter. If it was the starter keeping the engine from turning, you have really gotten it jammed with trying to turn it over. Maybe somehow try to turn the engine backwards some. Put in 3rd gear, and push backward.
 
Chiefguy said:
Seller said engine was coated for storage. It's like a bad black paint that is peeling off. No idea yet how to remove it. It's covering everything.
Click to expand...


Oooops, Motor Paint looked dark green to me in the pictures.


How long was it in Storage, and where was it stored (inside-outside, on concrete-gravel-dirt, out building or heated or attached garage)?
 
30 Closed Cab PU said:
Oooops, Motor Paint looked dark green to me in the pictures.


How long was it in Storage, and where was it stored (inside-outside, on concrete-gravel-dirt, out building or heated or attached garage)?
Click to expand...
The green is under the black paint. From what I saw, the car was on concrete floor in heated basement garage. But Had just been shipped from Maine. Was always inside for three years storage.Sent
Best I know.
 
Chiefguy said:
Seller said engine was coated for storage. It's like a bad black paint that is peeling off. No idea yet how to remove it. It's covering everything.
Click to expand...
A good power wash with hot water will likely clean it off licketty split. Just be careful not to take the paint underneath.
 
Sounds like your starter bendix is jammed into the flywheel. That happened to me on a trip a hundred miles from home. Unbolted the starter, and couldn't budge it by hand. In desperation, I jammed the heel of my shoe on the starter body as hard as I could and it came free. You may need some judicious use of a pry bar to work that starter body loose. Your engine will never turn over until you pull the starter. good luck. mike
 
You must log in or register to reply here.
Back
Top