NEW products available thread

We now have available new replacement starter cups for the truck 8RT-6392 bell housings. This is a brand new part made of steel that fits perfectly in the opening of the cast iron 8RT truck bell housings. Replace that damaged or missing cup. You can weld or glue the new cup into the place of the original cup, which was rolled/crimped into place by Ford. Protects your starter from road dust and water spray. Link to our website for these:

http://www.vanpeltsales.com/FH_web/engine-partsprices-pg2.htm
 

Attachments

  • 8RT-6392SC-startercup-A.jpg
    8RT-6392SC-startercup-A.jpg
    83.2 KB · Views: 22
  • 8RT-6392SC-startercup-B.jpg
    8RT-6392SC-startercup-B.jpg
    94.1 KB · Views: 17
  • 8RT-6392SC-startercup-bell-C.jpg
    8RT-6392SC-startercup-bell-C.jpg
    99.5 KB · Views: 19
  • 8RT-6392SC-startercup-bell-D.jpg
    8RT-6392SC-startercup-bell-D.jpg
    105.7 KB · Views: 20
Mac VP said:
We now have available new replacement starter cups for the truck 8RT-6392 bell housings. This is a brand new part made of steel that fits perfectly in the opening of the cast iron 8RT truck bell housings. Replace that damaged or missing cup. You can weld or glue the new cup into the place of the original cup, which was rolled/crimped into place by Ford. Protects your starter from road dust and water spray. Link to our website for these:

http://www.vanpeltsales.com/FH_web/engine-partsprices-pg2.htm
Click to expand...

Very Nice Mac Thank you.
 
We didn’t have a large quantity made for the first time….. wanted to see how they fit and get an idea of what the demand would be before we have more made. I’m very happy with the fit.
 
Hello Folks,

After always struggling to find good originals, I have decided to make the carpet retainer sockets for 1932 Fords, part no. 353109-S15. These are now available on my website or PM me here if you need more information. Don't forget to use discount code FORDBARN10 to save yourself 10% on any order.

Thanks!
 

Attachments

  • IMG_8419.jpg
    IMG_8419.jpg
    64.4 KB · Views: 32
  • IMG_8434.jpg
    IMG_8434.jpg
    24.3 KB · Views: 981
  • IMG_8435.jpg
    IMG_8435.jpg
    37.4 KB · Views: 972
  • IMG_8436.jpg
    IMG_8436.jpg
    30.4 KB · Views: 975
OldGold360 said:
Hello Folks,

After always struggling to find good originals, I have decided to make the carpet retainer sockets for 1932 Fords, part no. 353109-S15. These are now available on my website or PM me here if you need more information. Don't forget to use discount code FORDBARN10 to save yourself 10% on any order.

Thanks!
Click to expand...
542427


542428


542429
 
35fordtn said:
A few new items available:

1933-34 Ford rear transmission support
https://thirdgenauto.com/product/1933-34-ford-new-rear-transmission-mount/

1934 Ford Chrome plated grille
https://thirdgenauto.com/product/new-1934-ford-grille-chrome-plated/

1932-36 Ford rear transmission support special "D" headed bolts
https://thirdgenauto.com/product/1932-36-ford-transmission-mount-special-d-headed-bolts-set-of-4/
Click to expand...

Michael:

Any chance you'll be making the special the smaller diameter headed castle nuts for the '32-'36 D headed bolts?
 
Last edited:
Tim Ayers said:
Michael:

Any chance you'll be making the special the smaller diameter headed castle nuts for the '32-'36 D headed bolts?
Click to expand...

The bolts made are the longer of the two versions. Castle Nuts have become incredilbly expensive to make in the US. What I use are Model A Ford rear backing plate nuts made by Snyder's. They are 7/16-20 with a 5/8" hex like original unline the most common 11/16". They have a shoulder so if you are using the long version bolts in a short version scenario the work perfect, otherwise just tunr the shoulder off in a lathe.

https://thirdgenauto.com/product/19...ect-rear-brake-backing-plate-shouldered-nuts/
 
35fordtn said:
The bolts made are the longer of the two versions. Castle Nuts have become incredilbly expensive to make in the US. What I use are Model A Ford rear backing plate nuts made by Snyder's. They are 7/16-20 with a 5/8" hex like original unline the most common 11/16". They have a shoulder so if you are using the long version bolts in a short version scenario the work perfect, otherwise just tunr the shoulder off in a lathe.

https://thirdgenauto.com/product/19...ect-rear-brake-backing-plate-shouldered-nuts/
Click to expand...


Ah, got it. The difference in length is for the cast vs stamped couplers, right?
 
OldGold360,


Any chance that you'll be making the capped studs used with floor mats and your sockets?


Your sockets were also used on '33-'34 V8 passenger car #1 wood floor boards.
 
DavidG said:
OldGold360,


Any chance that you'll be making the capped studs used with floor mats and your sockets?


Your sockets were also used on '33-'34 V8 passenger car #1 wood floor boards.
Click to expand...

Hi David.
I am hoping to. I have some good originals to use, I just need to find the time to figure out how best to make them. I did just finish up everything I needed to do to be able to accurately reproduce the ‘32 floorboards and I will always have them in stock, unless they stop making nice plywood.

I am currently working on finishing up a couple of other pieces. When those are finished, I will look at reproducing those capped studs. I’ll share some updates here when that time comes. Till then, here are some pictures of the ‘32 Floorboards.
 

Attachments

  • IMG_8526.jpg
    IMG_8526.jpg
    49.8 KB · Views: 858
  • IMG_8527.jpg
    IMG_8527.jpg
    52.9 KB · Views: 853
  • IMG_8531.jpg
    IMG_8531.jpg
    56.9 KB · Views: 853
  • IMG_8525.jpg
    IMG_8525.jpg
    56.2 KB · Views: 851
  • IMG_8537.jpg
    IMG_8537.jpg
    32.9 KB · Views: 839
OldGold360 said:
Hi David.
I am hoping to. I have some good originals to use, I just need to find the time to figure out how best to make them. I did just finish up everything I needed to do to be able to accurately reproduce the ‘32 floorboards and I will always have them in stock, unless they stop making nice plywood.

I am currently working on finishing up a couple of other pieces. When those are finished, I will look at reproducing those capped studs. I’ll share some updates here when that time comes. Till then, here are some pictures of the ‘32 Floorboards.
Click to expand...
544601


544602


544603


544604


544605
 
You must log in or register to reply here.
Back
Top