NEW products available thread

1937 hood latch cam. 78-16628.


Original on right, finished repro in middle, cutout blank on left.


I had the cutout blanks laser cut which allows me to hand form and weld up to make the finished part without expensive tooling.
 

Attachments

  • 1937HoodHandleCamLow.jpg
    1937HoodHandleCamLow.jpg
    16.8 KB · Views: 145
These won’t be available until middle of February. But for the 32 guys a perfect reproduction of the transmission cover and dual temp gauge face are coming and both will be very very reasonably priced.

0ed04a5ae865b909d9860045b7a61148.jpg


b43f91380e1b4ddbe1416d0a235682cb.jpg



Sent from my iPhone using Tapatalk
 
Just back from the polisher:


1941-48 convertible visor arms. 304 stainless and polished. The mounting end is modified to use a "C" clip rather than being riveted as original. I have the springs also available.
 

Attachments

  • VisorArm1941-48low.jpg
    VisorArm1941-48low.jpg
    14.2 KB · Views: 49
Also back from the polisher:


Late 1939-1940 convertible visor arms. 304 stainless and polished. Spring is available. Carpenter had been making these but discontinued them about a year ago.
 

Attachments

  • VisorArm1939-40low.jpg
    VisorArm1939-40low.jpg
    9.4 KB · Views: 30
Yep, the polisher has been busy...


Late 1935-1936 Roadster/Phaeton windwing brackets. Investment cast 304 stainless and polished. Kit will include hardware as shown.
 

Attachments

  • WindshieldWindwing36Road-1low.jpg
    WindshieldWindwing36Road-1low.jpg
    26.9 KB · Views: 103
Karl,


Good show; right down to the correct lock nuts. Will you offer the rubber inserts to retain the glass?
 
No rubber inserts at this time, Carpenters are slightly off. There is some emerging technology to 3D print elastic materials at a reasonable price... but not affordable to me yet. The lock nuts are a commercial stainless nylock... that happens to look like the original.
 
Michael, you have to make the dual temp gauge faces for the 33/34 gauges. I have 6 of them that need face restoring.
 
Hello all
Does anyone know where to find the seal for a 1932 Ford Cabriolet header bow? Drake has quit making them. Realized too late that I should have snagged one. Insight appreciated.
 
Another simple item that is newly available.
Spring shackle bar for 32-40 fords made exact as original, with the correct shape.
2057b36db3ba0b96393dcca30a4e04bf.jpg



Sent from my iPhone using Tapatalk
 
The M only appeared on the forged version and only on those supplied by Moore Drop Forgings, which were in a minority of the originals that I've seen, NOS or used.
 
We sell on ebay, but prices are a bit higher as is shipping on there. Best to call direct, or use thirdgenauto.com
 
You must log in or register to reply here.
Back
Top