lube

[Pa Joe]

Quick question, How does the drive shaft bearing in the front of the torque tube near the speedo gear get lubed? Only grease fitting I see is on the univesal joint cover. Thanks Joe

 

[Jim Brierley]

I pack it like I would a wheel bearing, and hope for the best. That bearing is rarely a problem.

 

[Glenn C.]

Pack it with grease initially, then grease from the universal joint housing, should be able to lube from then on.

 

[deadelvis2000]

Are we all in agreeance? I am just about to install my bearing after a rear end rebuild and would like to know as well. Thanks

 

[Tom Wesenberg]

What Jim and Glenn said is how I do it also. Never had a problem.