Latest block info.

I have a SCAT crank and rods, Stipe 5 bearing cam and a Miller overhead waiting for this block! No pressure! LOL
 
I am sure that there are more listings where you can get a 5 main crank, these come to mind;
Scat, Molex, Crower, Velasco etc.

Crower I believe also makes the rods to with them.

Top quality rods are necessary when going this route.

Pistons are another piece of the puzzle.

IMHO, any OHV head that has siamese ports does not require a 5 main crank assy.

I have a 6 port flathead that has a 5 main, but is very very different than most.

John
 
I took my dad down to Kevin Prus Jr.'s to see the block build as it is about to be buttoned up. Kevin had the valve train operational and was putting in pistons. He had just painted a Snyder's 6:1 head that will be used. It looked great as the crank was turned and all the valves opened and closed. I have my video camera in the truck so it is ready when Junior calls me to come see it fire up.

Tod
 
You must log in or register to reply here.
Back
Top