Dwell Angle

[fredski]

I used the B cams in both my cars purchased from brattons / swapped out the A cams... Very high quality and a noticeable improvement as well

Are you speaking about camshaft or cam in the distributor?

If distributor do have to modify b cam to fit.

Not understanding this quite.

Fred

 

[fredski]

Okay to all , will give up dwell adjustment on the A .
It does work well on my 1963 (xxx) .

Fredski

 

[Mitch//pa]

Are you speaking about camshaft or cam in the distributor?

If distributor do have to modify b cam to fit.

Not understanding this quite.

Fred

The cam in the distributor:::: no modification needed:::::but do a timing and point gap reset after installation

 

[RonC]

A dial indicator setup on the back of the points is rhe most accurate way to set them. You can also check the variation in the cam lobes.