Backing Plate Bolts

[Dennis Pereira]

When I removed my rear brake backing plates bolts they lacked cotters . I now know why they were the wrong nuts too tall to line up with the hole in the bolt .The nut on the right if the photo shows .

 

[Tom Endy]

Attached article

http://www.santaanitaas.org/wp-content/uploads/2014/08/Rear-Backing-Plates.pdf

Tom Endy

 

[Dennis Pereira]

Attached article

http://www.santaanitaas.org/wp-content/uploads/2014/08/Rear-Backing-Plates.pdf

Tom Endy

Thanks Tom my problem was opposite with the wrong nuts I was unable to run down enough to uncover bolt cotter hole . Hopefully I have the right nuts in a can somewhere .

 

[Ernie Vitucci]

Good Morning...If you don't find them in your spare parts bins, then Burt's in Denver will most likely be able to supply you with reproduction or original nuts that will do the job. Ernie in Arizona