Ammco brake shoe chart

While he has been on line in the V8 section today, this one is from 2016-17 so you might send a PM or email to get his attention because he may not be looking in the Model A section.
 
I have sent about a dozen emails out to those requesting the Ammco brake shoe arcer charts. If you don't receive a copy PM me and I will accommodate your request.
 
I'm also in need of the ammco 4181 chart. Does any one have one? Also I could use some more of the gauge plates and anchor sleeves. Does any one have any to sell?
 
I realize this is an old thread.I came across it yesterday in my search. I have an Ammco 890 arc grinder with a 8250 fixed anchor shoe clamp.

I’m searching for the gauge plates and sleeves. If anyone has a set you’d part with or perhaps trace the plates and measure the sleeves so I could have some made I’d sure appreciate it. I’ve been searching for a while and it seems I might as well be looking for dinosaurs.

I too would appreciate a copy of the chart just in case I find the plates and sleeves.

Rdame11@yahoo.com.

Thanks
 
Robinnc said:
I realize this is an old thread.I came across it yesterday in my search. I have an Ammco 890 arc grinder with a 8250 fixed anchor shoe clamp.

I’m searching for the gauge plates and sleeves. If anyone has a set you’d part with or perhaps trace the plates and measure the sleeves so I could have some made I’d sure appreciate it. I’ve been searching for a while and it seems I might as well be looking for dinosaurs.

I too would appreciate a copy of the chart just in case I find the plates and sleeves.

Rdame11@yahoo.com.

Thanks
Click to expand...
these them
 
Last edited:
KR500 said:
I have sent about a dozen emails out to those requesting the Ammco brake shoe arcer charts. If you don't receive a copy PM me and I will accommodate your request.
Click to expand...

KR500,

Hi, I hope this message finds you well. I know this is an older post, but since I'm a new member I am not yet allowed to send private messages. I see you've been able to provide Ammco reference chart #4181 to other users on this forum, and I was hoping you could do the same for me. I just purchased a Model 890 Brake Shoe Arc Grinder with the #8250 brake shoe clamp, and have most everything I need for it except the reference chart. My email is philiprestores@gmail.com if you'd prefer to contact me there. Any help would be greatly appreciated!

Many thanks,
-Phil
 
Last edited:
KR500,
I have recently inherited an 890 Saf-Arc with 8250 clamp and shims, but need the gold plated list you mentioned having. If you are still willing to send a copy, or if anyone else that got a copy can forward it, I would greatly appreciate it. Since I'm fairly new, and haven't posted the minimum number of times it won't let me PM/email anyone.
My email is rileydarren @ johndeere.com

Thanks,
Darren
 
You must log in or register to reply here.
Back
Top