Ammco brake shoe chart

34fordy

34fordy

Well-known member
I am looking for Ammco 4181 chart that lists the proper gage plate and sleeve when arcing shoes with fixed anchors. Used on the 890 grinder with the
8250 fixed anchor shoe clamp. I would like to buy a copy if possible. I can not seem to find any info on this chart. Thanks,, Don
 
Can't help you, Don, but I remember that chart well & it's a MUST to have!
Hopefully someone can at least post a COPY & you might be able to enlarge it.
Bill W.
 
Thanks for the replies A -Men---If I ever find one I will surely let you all in on a copy somehow--There has to be a few out there somewhere!! Don
 
I have the 4181 chart. I wanted to get the gage adapter to do some Lincoln 12 inch shoes which used a fixed anchor. Tried Ammco and all parts for the shoe arcing machines was scrapped when the asbestos dust issue opened up. The chart is about 20 inches tall two sided. Ihave the charts for both the 4140 and 8250 clamps. Send me your email or PM me and I will scan and send to you in an email. NO charge of course.
 
KR500 said:
I have the 4181 chart. I wanted to get the gage adapter to do some Lincoln 12 inch shoes which used a fixed anchor. Tried Ammco and all parts for the shoe arcing machines was scrapped when the asbestos dust issue opened up. The chart is about 20 inches tall two sided. Ihave the charts for both the 4140 and 8250 clamps. Send me your email or PM me and I will scan and send to you in an email. NO charge of course.
Click to expand...

Thank you Sir!
Fullraceflathead@aol.com
Mrkevinekline@aol.com
 
KR500 said:
I have the 4181 chart. I wanted to get the gage adapter to do some Lincoln 12 inch shoes which used a fixed anchor. Tried Ammco and all parts for the shoe arcing machines was scrapped when the asbestos dust issue opened up. The chart is about 20 inches tall two sided. Ihave the charts for both the 4140 and 8250 clamps. Send me your email or PM me and I will scan and send to you in an email. NO charge of course.
Click to expand...
KR,
YOU'RE A GREAT DUDE, TO DO THIS:)
Bill W.
 
34fordy said:
I am looking for Ammco 4181 chart that lists the proper gage plate and sleeve when arcing shoes with fixed anchors. Used on the 890 grinder with the
8250 fixed anchor shoe clamp. I would like to buy a copy if possible. I can not seem to find any info on this chart. Thanks,, Don
Click to expand...

KR500 has generously scanned and sent copies to those of us who needed this VERY hard to find literature--I had searched extensively on the internet with no luck until Dan responded--Another great example of the great help available from the fine members of the FORDBARN--

THANKS DAN !!!!!!!!!!!!!!!!!!!!!
 
KR500 said:
I have the 4181 chart. I wanted to get the gage adapter to do some Lincoln 12 inch shoes which used a fixed anchor. Tried Ammco and all parts for the shoe arcing machines was scrapped when the asbestos dust issue opened up. The chart is about 20 inches tall two sided. Ihave the charts for both the 4140 and 8250 clamps. Send me your email or PM me and I will scan and send to you in an email. NO charge of course.
Click to expand...

Do you still have the copy of the 4181 Ammco chart? If so please send it to me at; pallison@metal-technologies.com Also if you do not mind please enclose your phone number I would like to discuss the procedure for the 890.

Thank You Phil
 
BornJohn, Welcome and ebay is the only place I a have seen parts. There is a gauge plate in the parts for sale section here though.


Mike
 
KR500 said:
I have the 4181 chart. I wanted to get the gage adapter to do some Lincoln 12 inch shoes which used a fixed anchor. Tried Ammco and all parts for the shoe arcing machines was scrapped when the asbestos dust issue opened up. The chart is about 20 inches tall two sided. Ihave the charts for both the 4140 and 8250 clamps. Send me your email or PM me and I will scan and send to you in an email. NO charge of course.
Click to expand...

I am also in need of this chart. Can someone send this to me as well? My address is ih_man50@hotmail.com

Thanks guys!
 
You must log in or register to reply here.
Back
Top