35/Cabriolet B pillar

[FlatheadTed]

35 Cabriolet B pillar L brackets, tell me what do they have to support the B pillar ? Thanks any one ,Ted

 

[FL&WVMIKE]

FLATHEAD TED .......................
Just what are you calling the "B" Piller ? If I can photograph mine, I will do so.
MIKE

 

[Lawson Cox]

The B pillar would be the pillar where the 1/4 panel and door meet would it not? Inquiring minds want to be sure. lol

 

[FlatheadTed]

Yes A = Cowl to Running board .B to 1/4 panel and door meet .Your onto it Lawson,On 34s there is a L casting bracket from the pillar to the floor .or at least on Roadsters ,Thanks Mike if you can photograph it.By the way Mike what holds the centre pillar on a 34 Phaeton ?? is there a T shaped one .

 

[TerryOH]

on the 35 Cabriolet there is a very thick and large casting (spade shaped) at the base of the B. there are two carrage bolts one into the top of the body mount the other into the top of the frame.

 

[FlatheadTed]

Thanks Terry does any one have a photo .

 

[Don Rogers]

Here's a low res photo taken off the internet a while back.

 

[FL&WVMIKE]

Flathead Ted ........................
I could not photograph the support in my '35 Cabriolet. It is completely covered up.
I was able to photograph part of the support in the '34 Phaeton.
MIKE

 

[FlatheadTed]

Thanks Mike and Don for taking the time .this will be very helpful Ted

 

[35cab]

Ted,
I am away from my car until the weekend, I can photograph the bracket and will post it then.
Gordon.

 

[35cab]

Ted
Sorry for delay in getting these up.
Two photos of bracket, unfortunately seat sides are in the way ,hopefully they show enough to be of use.
Gordon

 

[FlatheadTed]

Thanks Gordon Nice shots ,Its a bit cold to be in a Kilt ?? not so as my Uncle Charlie would say (Scottish )

 

[35cab]

Ted,
I aint got the legs for a kilt, their best feature is that they reach the ground.
Say Hi to uncle Charlie.