33 gas gauge issues

dean333

Well-known member
My gas gauge read 3/4 when full before I pulled the dash to get it woodgrained. The gauge hung upside down for about a month before I put the dash back in. Now no red fluid is visible anymore. Ideas??
 
Hanging upside down most likely drained all the red fluid out of the tube. Here are the instructions .
 

Attachments

  • Gas gauge instructions 1.jpg
    Gas gauge instructions 1.jpg
    90.8 KB · Views: 12
  • Gas gauge instructions 2.jpg
    Gas gauge instructions 2.jpg
    94.3 KB · Views: 11
  • Gas gauge instructions 3.jpg
    Gas gauge instructions 3.jpg
    95 KB · Views: 11
  • Gas gauge instructions 4.jpg
    Gas gauge instructions 4.jpg
    95.9 KB · Views: 11
Upside down! now the fluid has probably has very well coated the internals of your gauge and it will start rusting.
 
Tim
As Sheldon pointed out, you'd be best to pull it off and clean it thoroughly and then follow the posted "refill" instructions. Otherwise you will see it deteriorate and they are not as easy to find these days.
 
Back
Top