Bursonaw
Senior Member
Thanks for the enlargement. I have it up high on jack stands so I can do
a complete brake adjustment by the service manual and service every-
thing on the bottom. Everything looks like brand new, car hasn't been
driven 200 miles in over 40 years and has been stored in AC building
with humidistats. Only thing so far was a couple light bulbs and the
speedo changer for the Columbia rear which was never installed because
it has a radio and there is no room for stock changer. I have that figured
out. I repaired the AC in the building and was sitting there timing the run
time looking at the 36 from a distance and thought what a beautiful looking
car. Everything looks so fitting with the shapes all flowing together.
Top, long rear deck, doors rolling into the dash, shape of fenders running
boards, tires and spider hub caps. The only thing I would change is the
door mounted mirrors. They are to low and hard to see through. G.M..
You had mentioned that the stock speedo changer did not work for car because of the radio. I used the stock 36 changer with 46 - 48 vacuum diaphragms. I also had to use a 90 degree drive adapter as the dash is 1" closer to the firewall on roadsters than other models. This set up gave me some advantages. You can shift to overdrive and after the clutch is released you can put the selector back in standard drive. In this configuration the speedo reads correctly and the next time you are stopping the overdrive will automatically down shift and the speedo will always be reading correctly. The stock 36 setup will not do this. Attached are some pictures, hope this helps solve your clearance issues with the radio.
Sent from my iPad using Tapatalk