1936 choke and throttle rod length

[Alan O'Connell]

What is the total length including the knob of a 1936 club cabriolet choke and throttle rod?

 

[Don Rogers]

Alan, Here is a dimension sheet showing the dimensions for a 36 choke and throttle rode for your cabriolet. Don't worry about the design of the knobs.

 

[Alan O'Connell]

Thank you Don

 

[Rockymountainsparky]

Alan, Here is a dimension sheet showing the dimensions for a 36 choke and throttle rode for your cabriolet. Don't worry about the design of the knobs.

Don,
I can't quite read the writing in the picture. What is the amount of offset that needs to be bent in the rods? Also, the 30.76" length for a model 720... is that before it is bent?
The reason that I'm asking is because I'm having to modify some rods from a Ford tractor. Apparently these parts aren't made for a 36' Ford any longer.

 

[DavidG]

Have you tried downloading Don's illustration and then enlarging it on your computer? If you do that you should be able to read all of the writing.

 

[Rockymountainsparky]

Have you tried downloading Don's illustration and then enlarging it on your computer? If you do that you should be able to read all of the writing.

Yes, I did. Extremely fuzzy.

 

[Model51]

Here are some details from Don's drawing which you should be able to read. The overall length for your application is 30.76".

 

[Rockymountainsparky]

Here are some details from Don's drawing which you should be able to read. The overall length for your application is 30.76".

Perfect. Thank you.