1932-34 Model B Four Cylinder Group started!

I would also like to join this group. I have recently picked up a couple B motors,and 3 or 4 transmission cases. I have a few identification questions I can't seem to find answers to in archives.
 
Got G28T engines in my Model A's - can I join too?

I'm in. I've got G28T engines in both of my 1931 Model A's.... a G28T counts right?

Fordially,
Brad in Maryland
 
I have a question for the B engine experts.

When a B engine is installed in a 1932-34 Car, it has the exhaust manifold that has a 45 degree outlet at the back. That I know.

When installed in a truck, did they use a Model A exhaust manifold with the 90 degree bend at the back?
 
SteveB31 said:
I have a question for the B engine experts.

When a B engine is installed in a 1932-34 Car, it has the exhaust manifold that has a 45 degree outlet at the back. That I know.

When installed in a truck, did they use a Model A exhaust manifold with the 90 degree bend at the back?
Click to expand...

No 32 had the small angle (45 deg) 33/34 had a much more down angle easy to mistake it for Model A there was even a very slight change 33-34
 
Steve heres a pic of old 32
 

Attachments

  • phpmGaavwAM.jpg
    phpmGaavwAM.jpg
    51.8 KB · Views: 81
  • phpE0opdLAM.jpg
    phpE0opdLAM.jpg
    48.3 KB · Views: 48
Count me in.
32 pickup with the original "B" motor and looking for speed parts.
I have a pair of Stromberg 81`s en route and looking for a manifold and higher compression head.

 
I have a couple of 32/34 4 banger "C" heads if anyone needs one. I live near Peoria, IL. Any reasonable offer accepted. Thanks. Howard 309-363-0532
 
After being built over 50 years ago and never run....engine is finally in and running.
 

Attachments

  • IMG_318858268830758.jpeg
    IMG_318858268830758.jpeg
    83.1 KB · Views: 108
Last edited:
You must log in or register to reply here.
Back
Top