1932-34 Model B Four Cylinder Group started!

Mike V. Florida said:
With all these postings here is a social group really necessary?
Click to expand...
IMHO, the social groups splinter and fragment the information flow about our cars.

I may not have a particular car that a Social Group has been established for, but I still want to know what is being said. When somebody takes a discussion into a splinter group, in order to follow what's being said I have to visit that forum. And for Model A topics, there are 10 or 12 or more different forums!!! :eek:

The same problem on a worse scale than the old FordBarn vs. Ahooga when somebody would post one place and not the other. But then it was just two places, now it's a dozen and growing!

If Ryan would give us some way of combining a collection of these forums into a single "virtual" forum, I would be pleased. (I have asked for that, BTW.)
 
Problem is, there is nowhere for the B motor cars to fit in on here.
You have early V8, but no B stuff.
Plus I'm sure there will be discusions about hopping up a B and restorers don't want to hear and see that.So a scocial group is a way to solve this problem.
 
forever4 said:
Bill,
I would have to disagree. What information has been fragmented?

Fish are all in the ocean but form schools.
Actually it is useful for like minded people to know each other and share information.
People who want or 'need' to join will do so.
You can decide for yourself whether it is a benefit or a liability, but you don't have the 'right' to decide for others by campaigning against it. It is no skin off your nose.

Are you against Postal Truck groups, Station Wagon groups, etc for the same reasons?



Mike,
Yes, for the reason above. If it is not necessary to you, then ignore it.
Click to expand...

It is pretty easy to follow the "splinter" or "social" groups. Go to your profile page and click on the place where it says "Join social groups". You will be allowed to pick the groups you want to join, and then follow what is going on.

Scott,
Keep V-8ing and 4-banging!:D
 
forever4 said:
Bill,
I would have to disagree. What information has been fragmented?
Click to expand...
Does the fact that Model A-related information is scattered across a dozen or more forums mean anything BUT fragmented?
Fish are all in the ocean but form schools.
Click to expand...
To expand on your analogy: can the fish swim in more than one school at a time? Probably not.
Actually it is useful for like minded people to know each other and share information.
People who want or 'need' to join will do so.
You can decide for yourself whether it is a benefit or a liability, but you don't have the 'right' to decide for others by campaigning against it. It is no skin off your nose.

Are you against Postal Truck groups, Station Wagon groups, etc for the same reasons?

....
Click to expand...
As for "campaigning against" their use, I suspect that is my right. If nobody agrees, I lose. If others do, perhaps changes could and should be made. In fact I offered a solution that would suit me just fine and would affect no-one else. But getting it implemented is probably close to zero. :(

IMHO, the fragmenting of information is the one serious deficiency of the new FordBarn format compared to the old.
 
I wana join....I have a 1932 Toro tractor w/Model B, used on golf course to pull 5 gang reel mowers and haul sand to sand traps....also a hopped up 4 banger in my RPU...Thomas head-mallory-burns downdraft-alumn water pumpand timing gear cover, etc....also a Model B Smith compessor...and several other B motors
 

Attachments

  • MVC-026S.JPG
    MVC-026S.JPG
    38.3 KB · Views: 152
  • MVC-033S.JPG
    MVC-033S.JPG
    37.8 KB · Views: 102
  • MVC-028S.JPG
    MVC-028S.JPG
    38.9 KB · Views: 87
nostalgicford said:
I wana join....I have a 1932 Toro tractor w/Model B, used on golf course to pull 5 gang reel mowers and haul sand to sand traps....also a hopped up 4 banger in my RPU...Thomas head-mallory-burns downdraft-alumn water pumpand timing gear cover, etc....also a Model B Smith compessor...and several other B motors
Click to expand...

Cool:D My grandfather had a ride-on Toro in the 70s. I did not realize the company went back that far. Thanks for the pics. With all those B-powered items, don't see why you couldn't join. It's up to Vince though I guess.
 
I'm delighted to find this exclusively model B site but slightly confused about where to post this need (already did so somewhere else not too far away).

I do need both of the B-6042 special bolts that fasten the radius rod bracket to the flywheel housing. Any ideas?

Thanks for any thoughts.

Fred
 
I used countersunk allen head bolts until I found the correct ones. Where are you located? Please post or ad to your profile.

Charlie Stephens
 
ffernald said:
I'm delighted to find this exclusively model B site but slightly confused about where to post this need (already did so somewhere else not too far away).

I do need both of the B-6042 special bolts that fasten the radius rod bracket to the flywheel housing. Any ideas?

Thanks for any thoughts.

Fred
Click to expand...

Fred, try this site, Roy has most of the correct fasteners. http://www.fordscript.com/
 
Last edited:
Here's my Dad's 1932 Model B Ford Sports Coupe,that he purchased from a private collector after a bushfire destroyed it.

1932SportCoupe1.jpg


1932SportCoupe2.jpg


1932SportCoupe3.jpg


CopyofNewFolder030.jpg


It's going to be put back on the road one day...believe it or not?
 
keen to join, how do we do it. Building diamond B , building 5 main bearing crank & girdle, plus few other tricks, not a road engine BUT. Derek In NZ
 
I have a B engine in my 1932 roadster and have installed a Riley two port with twin 97 buba dis and drove it yesterday for the first time. WOW what a difference.
 
You must log in or register to reply here.
Back
Top